Mrop Posted June 1, 2012 Report Share Posted June 1, 2012 im remaking my build.old had so many different setups and random stuff.about me:im 25yr old IT student, who builds an old volvo as an hobby on his spare time, budget is slim to none, but that does not necessary mean nothing. just means that every step has to be thought several times and need alot of work to save money for the pieces.about car:i'ts a volvo 245, B200F, 5speed manual. and it has a wall innit.First Exterior:Car looked like this back in summer 2011.Pretty fast after getting it i tinted the backwindows.then i got rid off the VOLVO -sign infront.Finally i reheated the front bumper, bought bright turning signal covers.added alot of stickers ofc. MAXBOOM -The Loud Side Of Life- then the interior:2011 summer's first setup was CRUNCH FATBOII with some shitty amp then it was Autostudio REF UNL 18" with Focus acoustics 1500D, 193l box 30Hz tuned.i played 147,98dB peak 144,2dB AVG with MaxBoom contest -song.Spring 2012 i built first wall.It was 6th order with 330l back (30Hz tune) 170l front (45Hz tune).i played 144.22dB peak, 142,9dB AVG (MB song)Last one was 4th order with same box as the 6th order.I played 144.3dB peak @ 28Hzit was pretty monstorous hairtricker.but on AVG it hit like 120dB on MB song. so it had to be a goner.then when summer 2012 started, i ripped the 4th order off and started to build another wall.First i made a skeleton around.more skeletonme building more and morefloorfirst plywood screwing in!floor goin in www.peranurkka.net Link to comment Share on other sites More sharing options...
Mrop Posted June 1, 2012 Author Report Share Posted June 1, 2012 first ply at the back. small holes, but got filled up made some sealers to the sides, not sealing 100% but it's a start backside. inside got doublesealed. still needs bracing and alot of stuff. that's the thickness now. 36mm. i will do triangle pieces to the corners to seal em completely, and planning on fiberglassing the whole inside someday. then i started to make the doors i planned to use my 10" PA -speakers from my old test box 4x 6,5" speakers, one 10" and one 3" aeroport. i use old panels from old doors so it will be sealed at the window both doors just before the fabric thick fleece + first layer of resin two layers resin on top, one inside + some fiberglass. i need to break the bracing from inside and fully fiberglass the inside. but i am running on very low on cash, so ill start doing the wall before i can finish doors. sofar so good, let me know your thoughts. www.peranurkka.net Link to comment Share on other sites More sharing options...
Mrop Posted July 8, 2012 Author Report Share Posted July 8, 2012 long time no see, first sounds are out! doors had fiberglass and stuff innit installed electric windows to the front also. amps for doors only, blaupunkt to highs, alpine to 10" bass and 6,5" coaxials on doors last but not least i participated in Karhu Cruising event where i burp'd 147,6dB with roughly 1000w rms my meters calc'd that i had 800w power at burp. www.peranurkka.net Link to comment Share on other sites More sharing options...
Mrop Posted July 13, 2012 Author Report Share Posted July 13, 2012 hehehe i'm about to burp 150 with less than 1000w rms, www.peranurkka.net Link to comment Share on other sites More sharing options...
Mrop Posted July 17, 2012 Author Report Share Posted July 17, 2012 148,8dB with 880w... @ 37Hz www.peranurkka.net Link to comment Share on other sites More sharing options...
Mrop Posted August 14, 2012 Author Report Share Posted August 14, 2012 YAY! www.peranurkka.net Link to comment Share on other sites More sharing options...
Mrop Posted August 16, 2012 Author Report Share Posted August 16, 2012 www.peranurkka.net Link to comment Share on other sites More sharing options...
Bdurb Posted August 18, 2012 Report Share Posted August 18, 2012 that is sick, especially for a fellow walled wagon My old Build Log! http://www.stevemead...der-in-a-jetta/ Two Obsidian 15s V2 Two Audiopipe Apsm 1500s Fourth Order Wall TEAM CLEARLY LOUDER TEAM OBSIDIAN AUDIO Link to comment Share on other sites More sharing options...
kryptonite Posted August 18, 2012 Report Share Posted August 18, 2012 Def looks good, lots of work for sure! DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick. Link to comment Share on other sites More sharing options...
Mrop Posted February 6, 2013 Author Report Share Posted February 6, 2013 www.peranurkka.net Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.