Jump to content

cant find size specs for 2000 GMC sierra ext cab. front doors..... ?


sbg

Recommended Posts

so i just put in a new cdplayer for a friend, now he wants to put in new speakers in the front doors. driver side speakers does not work but the tweeter does...and pass side door shit is shot. i think its a 6 3/4'' and a 1'' tweeter but not sure, i have not pulled door panels yet.. . just wanted to see if some one know's off hand. its a GMC sierra 1500 z71 ext cab. when i look online all i can find is that its a 6 1/2 speaker but does not say it has a tweeter? and then some other sites say its a 6 3/4'' speaker... i just want to pull out the old stuff and screw in the new and fit the way they should. not going for top of the line just something that work good. the guy dont want subs or shit like that.

01 focus se

110 amp alt

Big 3 sky high and stinger hpm ofc 1/0

Super start platinum AGM (starting)

2 runs of 1/0 Execution audio front to back

Kenwood double DIN DDx271

A pillars- orion 4" super tweeter and 2-1" alpines.

Orion xtx 64 in the front doors

2:1 4th order bandpass

Sealed off trunk

Digital designs deadener on roof/ rear deck

Orion hcca 12s (black coils)

Orion xtr3700.1

Orion xtr250.2 mid/highs

All sky high 1/0 in trunk dual runs(power/ground)

Sky high dual 1/0 inputs

2 xs power D3100 in back

Sky high batt blocks

Rose audio batt blocks

Stinger volt meter

All sky high 1\0 fuse and holders

Db link remote/ rca

Link to comment
Share on other sites

so i just put in a new cdplayer for a friend, now he wants to put in new speakers in the front doors. driver side speakers does not work but the tweeter does...and pass side door shit is shot. i think its a 6 3/4'' and a 1'' tweeter but not sure, i have not pulled door panels yet.. . just wanted to see if some one know's off hand. its a GMC sierra 1500 z71 ext cab. when i look online all i can find is that its a 6 1/2 speaker but does not say it has a tweeter? and then some other sites say its a 6 3/4'' speaker... i just want to pull out the old stuff and screw in the new and fit the way they should. not going for top of the line just something that work good. the guy dont want subs or shit like that.

did you look at crutchfield fitment chart ?thats where i go to find out what fits

Link to comment
Share on other sites

Also, are these being run off of the stock head unit in the truck? He's not going to get any serious midbass off of factory head unit power. Get a nice set of mids and highs that have a good frequency response down low, like 45 Hz and up.

Im not the one you want to try to troll. Just a fyi for you.

Link to comment
Share on other sites

Also, are these being run off of the stock head unit in the truck? He's not going to get any serious midbass off of factory head unit power. Get a nice set of mids and highs that have a good frequency response down low, like 45 Hz and up.

i just put a new JVC -KD s28 head unit in, puts out 20rms x 4 i think! he is not in to car audio at all he just want to put new stuff in because the stock is pop' d . know of a cheap set of components. with the adapter plates. looking to spend $ 50 like i said he dont want some crazy shit just something that works good.

01 focus se

110 amp alt

Big 3 sky high and stinger hpm ofc 1/0

Super start platinum AGM (starting)

2 runs of 1/0 Execution audio front to back

Kenwood double DIN DDx271

A pillars- orion 4" super tweeter and 2-1" alpines.

Orion xtx 64 in the front doors

2:1 4th order bandpass

Sealed off trunk

Digital designs deadener on roof/ rear deck

Orion hcca 12s (black coils)

Orion xtr3700.1

Orion xtr250.2 mid/highs

All sky high 1/0 in trunk dual runs(power/ground)

Sky high dual 1/0 inputs

2 xs power D3100 in back

Sky high batt blocks

Rose audio batt blocks

Stinger volt meter

All sky high 1\0 fuse and holders

Db link remote/ rca

Link to comment
Share on other sites

With that kind of budget maybe see if you can find some Infinity Reference comps.

so im looking at crunch

With that kind of budget maybe see if you can find some Infinity Reference comps.

so do i look for 6 / 3/4 '' with a 6 1/2 adapter plates because all the stuff i see does not show what the plates are or the size of them?

01 focus se

110 amp alt

Big 3 sky high and stinger hpm ofc 1/0

Super start platinum AGM (starting)

2 runs of 1/0 Execution audio front to back

Kenwood double DIN DDx271

A pillars- orion 4" super tweeter and 2-1" alpines.

Orion xtx 64 in the front doors

2:1 4th order bandpass

Sealed off trunk

Digital designs deadener on roof/ rear deck

Orion hcca 12s (black coils)

Orion xtr3700.1

Orion xtr250.2 mid/highs

All sky high 1/0 in trunk dual runs(power/ground)

Sky high dual 1/0 inputs

2 xs power D3100 in back

Sky high batt blocks

Rose audio batt blocks

Stinger volt meter

All sky high 1\0 fuse and holders

Db link remote/ rca

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 867 Guests (See full list)

×
×
  • Create New...