Mako1215 Posted July 8, 2012 Report Posted July 8, 2012 I have a quick question to see if my idea will work. I have 2 DVC 4 ohm subs, and want a 2ohm load from each one to my amp. So I was wondering if I have a box built, and have each sub with it's own terminal cup will it still work that way? My amp is a monoblock with 2 sets of outputs, at 2ohm it outputs 1200watts rms, and it would be perfect for my subs which is why I'm wondering this. Quote
Trey_Dog650 Posted July 8, 2012 Report Posted July 8, 2012 i dont think so. pretty sure it will be at 1 ohm Quote 13 Kia Forte Build! 07 Hyundai Accent Build ***Super Seller*** N8ball2013 And then he gets to say ok all you guys were right. im sorry for being a dummy poo poo head.
fosgatefan821 Posted July 8, 2012 Report Posted July 8, 2012 it will be 1 ohm Quote 2007 Ford Ranger (ALL YET TO BE INSTALLED - DUE TO WORK SCHEDULES) K&N Performance Air Intake Massive Audio D2400 Mono Amplifier 2 Custom Built 8" Subwoofers in Ported Enclosure Pioneer AVH-P4400BH In Dash Double Din DVD Player (Video Bypassed) 4 - Pioneer TS-A6886R 6" X 8" 2 - SMD Heavy Duty Single ANL Fuse Blocks 2- Stinger SPP1200 Dry Cell Batteries JL AUDIO Interconnects 2/0 Gauge Big 3 ILL Customz 8 Spot Flat Lug Style Bolt Down Terminals ILL Customz 1/0 to 4 Gauge Power / Ground Reducers Factory Alternator __________________________________________________________________________________________________________________________________ 2002 Cheverlot Monte Carlo SS - (Deceased) 2 - Rockford Fosgate Power 1501BD 1 - Rockford Fosgate Power 851x Rockford Fosgate Power 6 1/2 Components Rockford Fosgate Power 3 way 6x9 2 - JL Audio W7 13.5" Subwoofers (Sealed) Pioneer AVH-P4400BH In - Dash DVD Player Pioneer AVIC - U250 - Add-on GPS Navigation System Audio Control 6XS 4 Way Crossover / Line Driver Ohio Generator 200 Amp Alternator 3 - Stinger SPP1200 Batteries 1 - Optima D34/78 Battery
Mako1215 Posted July 8, 2012 Author Report Posted July 8, 2012 Damn. So even like that the amp will still see a 1ohm load? I was hoping it would be a 2 with both of them wired to 2ohm. Quote
Guest Posted July 8, 2012 Report Posted July 8, 2012 nope. you're wiring two dual 4 ohm subs in parallel to a monoblock amp (single channel amp) so the amp will see 1 ohm Quote
Mako1215 Posted July 8, 2012 Author Report Posted July 8, 2012 So because it's a mono it still would see a 1 load, but if it was a 2 channel each channel would see a 2 load? Quote
Guest Posted July 8, 2012 Report Posted July 8, 2012 So because it's a mono it still would see a 1 load, but if it was a 2 channel each channel would see a 2 load? monoblock would see 1 ohm. 2 channel would see 2 ohm in stereo. if you had to use a 2 channel for subs, i'd bridge it if possible Quote
AB18VFL Posted July 8, 2012 Report Posted July 8, 2012 when you hook up two subs to a monoblock at 2 ohms each, the amp internally bridges them to a 1 ohm load. Quote SUBSCRIBE AT YOUTUBE! 18abVFL < CLICK!! 2005 Subaru Impreza My build log. Head unit- Kenwood Excelon KDC-X695 Front doors- Rockford Fosgate 6.5" Prime components Rear doors- Rockford Fosgate 4" Punch coaxials Sub amp- Audiopipe AP18001d Subs- Two American Bass TNT 10"s Box- 2.6 cubes @ 34hz, 36in of port Big 3 & run of Raptor 1/0 to rear powercell TEAM 808 UPSTATE NY. Can it be heard 2 blocks away, thats how i rate systems.
Mako1215 Posted July 8, 2012 Author Report Posted July 8, 2012 (edited) Yea I'm just going to have to run them at 4 for now, sell the amp, and buy something 1 ohm stable so I can get some more power. Edited July 8, 2012 by Mako1215 Quote
Crandis16 Posted July 8, 2012 Report Posted July 8, 2012 Yea I'm just going to have to run them at 4 for now, sell the amp, and buy something 1 ohm stable so I can get some more power. good choice and welcome to the forum. How much power do you need to run to each sub Quote My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.