Need Help Choosing Amp Plz!

[Keenen TheAbstract Jones]

I Got 4 12" Kenwood Excelon Subs From A Family Member They Are Single Voice Coil And Are 400 rms Not The Greatest I Know But Hell Might As Well Use Them. So Im Jus Looking For An Amp That Will Push And How Much They Usually Run... Help If You Can Thanks

[MIKE-2U]

With them all wired together whats the final load?

[Robby Holmes]

if they're 4 ohm woofers

you can either wire them to a 4ohm load or 1 ohm

e/: if they're 8ohm woofers, they can be wired to 2 ohms

Edited July 10, 2012 by Robby Holmes

[Jessica]

Those look eerily like the w3013ps subs they make but with a slightly different cone(<-edit). I mean the specs are almost identical. Hmm, I'm going to bet your best bet is either give them 2cuft each and tune really low or put them in a sealed box. Since they are so similar i would say they would probably do better sealed. Wire to 1ohm and put them on a skar1500.1 if they die just get something better.

Edited July 10, 2012 by strangeduck

[HunterJohnson]

skar 1500 is a good choice! hit up bamapride for a price!

Edited July 10, 2012 by HunterJohnson

[Guest]

i recommend having them wired like this

edit: what is your budget for an amp around 1600w?

Edited July 10, 2012 by Kranny

[MIKE-2U]

A 1500 watt amp of a quality brand such as Dc 1.5k, Skar 1500, sundown 1500 etc all do more than 1500 at 1 ohm

[Guest]

A 1500 watt amp of a quality brand such as Dc 1.5k, Skar 1500, sundown 1500 etc all do more than 1500 at 1 ohm

dc doesnt make a 1.5k. and your sig is long as fuck lol

[CleanSierra]

i recommend having them wired like this

http://images.the12volt.com/12voltimages/4_4ohm_svc_1ohm.gif[/

edit: what is your budget for an amp around 1600w?

If they are eXcelon, they are likely Dual voice coil subs. My bet is they are Dual 4 ohm coils.

[Robby Holmes]

try an 1800 watt kenwood

not the greatest brand, but i had 2 12" Alpine Type E's on it and it was totally fine