dyablo409 Posted July 10, 2012 Report Posted July 10, 2012 so i have asked this before but with no results so now i found this with Google "finally used it to search for stuff" http://rftech.custhelp.com/app/answers/detail/a_id/98/~/using-bd-sync-to-bridge-two-mono-amps so by what it says i would still have to use both the gain nobs. This is what i was trying to avoid because one of my gain nobs is messed up. is there any way around this or i just have to get it fixed and power sync them. i really don't see any point in having the cable if you know what i mean. thanks in advance for any help btw love this place
fox_racin4 Posted July 10, 2012 Report Posted July 10, 2012 look at the way sundown amps are starpped, when i was strapped i only used 1 knob 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole
dyablo409 Posted July 10, 2012 Author Report Posted July 10, 2012 look at the way sundown amps are starpped, when i was strapped i only used 1 knob yes i know i have looked into that but these are a bit older and the web site says that you still have to match the gain Gain Controls - It's important to set the gain control on both amplifiers exactly the same . This allows the amplitude of the first amplifier (0°) to match the sign-wave amplitude of the second amplifier (180°.) This insures that both amplifiers produce a full musical sign-wave
fox_racin4 Posted July 10, 2012 Report Posted July 10, 2012 What amps, Usually the purpos of strapping is so you only need 1 gain knob lol 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole
dyablo409 Posted July 10, 2012 Author Report Posted July 10, 2012 its the ones i have in my avatar they are the 1500bd power series like 2003 model i would figure using only one knob but that is what the site says
dyablo409 Posted July 11, 2012 Author Report Posted July 11, 2012 anyone else i really want to put the other amp in. its just sitting in my closet doing nothing but collecting dust
AMI CUSTOMS Posted July 11, 2012 Report Posted July 11, 2012 Sounds like you are SOL, those model RF amps suck IMO, you have to set both gains and each phase, when you bridge two together they split the sine wave. So each amp produces half the wave. TEAM SOUNDQUBED -- TEAM SOUTH TEAM S.O.B. - Founder & Captain 3x Streetbeat World Record Holder 2017 MWSPL 1st place Mayhem & 4th Xtreme 4 2016 MWSPL 1st place Mayhem/2nd Adv 4/2nd Xtreme 4 2015 MWSPL 2nd place Mayhem & 4th Xtreme 4 2014 USACI 2nd place Streetbeat 5 - 162.6 db 2014 MWSPL 2nd place Xtreme 4 - 144.9 db 2013 USACI 1st place Streetbeat 4 - 161.9 db 2013 USACI 1st place Street Q+ - 162.8 db 2013 MWSPL 3rd Kaos2 & 4th Xtreme 4 2011 USACI 2nd place MOD 1001-2k - 160.0 db 2011 MWSPL 4th place: Adv3 - 157.8 db, Kaos2 - 150s db, Xtreme4 - 140s db 2010 ARSPL 1st place 501-750 - 160.3 db Arkansas loudest Best score to date 164.4 db - Termlab Outlaw Streetbeat 4 - 161.9 db Streetbeat 5 - 162.6 db MWSPL on Dash Legal door open (Music) - 162.5 db Sealed on dash Legal (Music) - 161.1 db - Termlab THE BLACK NASTY CURRENT BUILD & FAB The Black Nasty (6) 15 Rebuild Log 2012 (4) 15 Walled Sierra Build Log Evo X build log Facebook page The Black Nasty
dyablo409 Posted July 11, 2012 Author Report Posted July 11, 2012 Sounds like you are SOL, those model RF amps suck IMO, you have to set both gains and each phase, when you bridge two together they split the sine wave. So each amp produces half the wave. so no getting around it i should just put an amp on each sub and power sync them. o and fix the knob first
Recommended Posts
Archived
This topic is now archived and is closed to further replies.