any one good at making boxes? need help!

[caraudionoob]

This is the tutorial for Torres' Calculator. It's very good; it also shows you how to draw it in Sketchup.

http://www.stevemeadedesigns.com/board/topic/145174-ported-box-design-a-tutorial-updated-630/

[locomanny569]

ok im gonna go with the box he gave me makes more sence but!!!!! is this how it would look made or did the concept go over my head?

[locomanny569]

another pic sorry for my lack of knowledge

[OrionStang]

Thats about right. One change though, when the port turns, it should be half the width of the middle port. So its 3.5" all the way back, and 1.75" after the turns.

So the first port pieces would be 15.75", then the second pieces would be 10 5/8".

[locomanny569]

Thats about right. One change though, when the port turns, it should be half the width of the middle port. So its 3.5" all the way back, and 1.75" after the turns. So the first port pieces would be 15.75", then the second pieces would be 10 5/8".

thank u!!!!!!!!! now i could get started and finsh my build once and for all!