Lucky4Designs Posted August 25, 2012 Report Share Posted August 25, 2012 A friend of mine wants a box built for his 8's. He has a '72 Chevy C10 regular cab, and has plenty of room for a center console. He listens to a lot of Gucci, so low tuning would be ideal, I've personally been going through some pretty stressful times right now and can't seem to focus long enough to get a good design going and I feel like I'm losing my muse :/ Any suggestions as to box size? He's wanting to go with just a standard slot port, and will be running roughly 250w RMS to each sub. Any pointers would be great, thanks guys! 2001 Toyota Corolla CE: 4x Crescendo PWX6.5's 2x Crescendo FT1-SE's 1x DC Audio lvl 2 M1 8 (looking for more) Slot port box 0.7ft^3 @ 31.77hz Rockford Fosgate R750.1 1/0 Knu wiring all around Looking for XS Power D1200 Link to comment Share on other sites More sharing options...
ZachG Posted August 25, 2012 Report Share Posted August 25, 2012 Max dimensions and I'm sure you'll get a box design in a hour 1998 Pontiac grand prix gtp supercharged2 12" Obsidain Audio V.1 on a 2011 zx1500.1 at 2 ohms. 20ft of Knuconceptz CCA 0 Guage. 2nd Battery is a Shurken BT-120. Box is 3.5cu tuned at 31.8hz sealed off from the trunk. 14sqft of Dynamat on the Rear deck top & bottom. Soon to be more for doors/roof. Gets low & loud Did a 140.5 Sealed at Battle of the boom in June 2013 dropping to 12.7v (need a alt mines going bad) Link to comment Share on other sites More sharing options...
certifiednut Posted August 25, 2012 Report Share Posted August 25, 2012 with that power i would use a box that is about .8-1.0 cube per speaker tuned to 32-34 hz. these orphans aren't going to feast on themselves Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.