zydrix Posted September 16, 2012 Report Posted September 16, 2012 thats not bad then for 220 or in that area for the BB2400.1 My build 98 s10 2.2 3 american bass HD 15s with psi soft parts. (on there way here) atomic at-3000.1 (soon) 146.2 outlaw @39hz., bad alt an bad batt when termed (old 2 12" build) alpine 6.5s in doors infinty 4x6s in dash. clarion cz201 HU. mechman 240a H/O alt stuff i still need. SHCA 2/0 wire SHCA 1/0 to 2/0 adapters Atomic AT-3000.1 Lots of sound deadner new mids an highs, still debating on what to do. A few Deka g31 batts.
TylerParrish Posted September 16, 2012 Report Posted September 16, 2012 No, first build was 2 VVX-12's, not inverted, just a plain front ported box facing forward, only difference would be your stable electrical and your sealin 'er up right off the bat. Oh well, i decided to "downgrade" to some 10's, the 12's were a little too hard to work with in my trunk for my purposes. What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter
Nate Futuristic Posted September 16, 2012 Author Report Posted September 16, 2012 thats not bad then for 220 or in that area for the BB2400.1 yea i think im just gonna snag the bb2400.1 he about a hour away so it will be about the same in gas vs shipping (25 bucks i think he said) unless that guy with the 2200d hits me up down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups ^^ Cant wait to swalllow Ghost's babies
Nate Futuristic Posted September 16, 2012 Author Report Posted September 16, 2012 No, first build was 2 VVX-12's, not inverted, just a plain front ported box facing forward, only difference would be your stable electrical and your sealin 'er up right off the bat. Oh well, i decided to "downgrade" to some 10's, the 12's were a little too hard to work with in my trunk for my purposes. i cant wait to see what some beefy 10s will do in our car i was thinking about doing 2 10s (dc level 4s) on 4k but i decided to build the electrical a little more on this vehicle since i sold my 275a singer alt for my jimmy down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups ^^ Cant wait to swalllow Ghost's babies
TylerParrish Posted September 16, 2012 Report Posted September 16, 2012 Yeah, waiting for some money to start rollin in before i can really do anything. Just gotta wait til i can put it back on the road Oct. 5th...also happens to be my 18th birthday . But Orion's 2 1-'s that he once had impressed me enough to go that route. Just need to beef up my electrical now so it'll be able to power the 3500 i wanna put in it. What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter
TylerParrish Posted September 16, 2012 Report Posted September 16, 2012 Can't decide what subs exactly yet, wanna either go Fi or DC, but im open to other opinions as well What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter
zydrix Posted September 16, 2012 Report Posted September 16, 2012 No, first build was 2 VVX-12's, not inverted, just a plain front ported box facing forward, only difference would be your stable electrical and your sealin 'er up right off the bat. Oh well, i decided to "downgrade" to some 10's, the 12's were a little too hard to work with in my trunk for my purposes. i cant wait to see what some beefy 10s will do in our car i was thinking about doing 2 10s (dc level 4s) on 4k but i decided to build the electrical a little more on this vehicle since i sold my 275a singer alt for my jimmy i was after that alt in ur jimmy. just didnt have the funds on hand at that moment My build 98 s10 2.2 3 american bass HD 15s with psi soft parts. (on there way here) atomic at-3000.1 (soon) 146.2 outlaw @39hz., bad alt an bad batt when termed (old 2 12" build) alpine 6.5s in doors infinty 4x6s in dash. clarion cz201 HU. mechman 240a H/O alt stuff i still need. SHCA 2/0 wire SHCA 1/0 to 2/0 adapters Atomic AT-3000.1 Lots of sound deadner new mids an highs, still debating on what to do. A few Deka g31 batts.
Nate Futuristic Posted September 16, 2012 Author Report Posted September 16, 2012 Can't decide what subs exactly yet, wanna either go Fi or DC, but im open to other opinions as well im a Fi fanboy dc prices vary to much ( no auth dealer near me so i gotta request/ask like 4-7 people to find the lowest price) No, first build was 2 VVX-12's, not inverted, just a plain front ported box facing forward, only difference would be your stable electrical and your sealin 'er up right off the bat. Oh well, i decided to "downgrade" to some 10's, the 12's were a little too hard to work with in my trunk for my purposes. i cant wait to see what some beefy 10s will do in our car i was thinking about doing 2 10s (dc level 4s) on 4k but i decided to build the electrical a little more on this vehicle since i sold my 275a singer alt for my jimmy i was after that alt in ur jimmy. just didnt have the funds on hand at that moment i had it posted pretty cheap got snagged up in a week or so just in time to order one for this car kinda went small on it but these v6s dont have many options down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups ^^ Cant wait to swalllow Ghost's babies
Nate Futuristic Posted September 18, 2012 Author Report Posted September 18, 2012 well i got some updates i worked on the doors some more (please remember this is the FIRST time im doing door pods the only training or experience is watching a friend do it and videos/pics) my amp is bought and has been shipped AQ2200d!! thanks again zach! few problems i ran into trying to figure out how i was going to do it are as followed *stupid carpet will most likely be fiber glassed over *will not be flush mounted because i dont have the tools (used a jig saw to cut the rings and had to sand them at work) * fiberglass will and must be covered with carpet due to the fact it will most likely be wrapped around of the door a bit * the grills that came with these components look gay so im either going to fab up some custom rings for the outside or buy some grills that look good *couldnt get the angle right on the 6.5s but it turned out ok i guess good thing so far *test fit the doors before fiber glassing and they fit! down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups ^^ Cant wait to swalllow Ghost's babies
Nate Futuristic Posted September 18, 2012 Author Report Posted September 18, 2012 driver door all mocked up and ready for cloth/fiber glass the passenger door has been glassed already but no more updates until i reinforce them with some tiger hair i got and bondo they look like a mess right now my plans are to get them bondo'd tonight so they can have a nice 6-8 hours to dry and cure before i start sanding and what not to them tomorrows goal is to get my 4xs power batts in with the false floor and 1/0 ran down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups ^^ Cant wait to swalllow Ghost's babies
Recommended Posts
Archived
This topic is now archived and is closed to further replies.