Jump to content
Second Skin Audio

2 Fi Bl 10's box design. *Think i finally got 'er right!*


TylerParrish

Recommended Posts

Posted

Porting forward with an aero doesn't work very often in trunks.

If you just need a couple extra inches, you can try a pair of 4" ports, rather than a single 6"

otherwise if you have to go slot, here's some rough numbers for you.

box dims.

12.5 high, 30 wide, 21 deep.

1 extra baffle

port dims.

11 high, 3 wide, 26 long

that's 33 sq inches of port

net volume is ~2.4, so 1.2 per sub

tuning @ 33hz

If you really wanna do an aero though, consider porting to the side. seen plenty of setups like this, and they usually do pretty well.

My current setup is 2 4 inchers ported to the side, most likely, I'll be making a few different designs out of mdf to see what i like best before i actually go and build the real box from birch

What the f**k is an appropriate signature supposed to look like?

2013 Kia Forte Koup

Pioneer AVH-X4600BT

iDMax 12

DD M1c @ 2 ohms

Rockford Prime 200.2

Pioneer 6.75" Comp Set

XS S3400, D2700

Project DB Battery Terminals

Axxess ASWC

Stinger HPM Everywhereeee

90 Sq. Ft. of Stinger Roadkill

Stock Alt

Stuff To Come

Sundown X-12

New Amp

New Comps

4 Channel Amp

My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/

My Old Build: http://www.stevemead..._+2000 +mustang

Avatar Courtesy of SnowDrifter

Posted

think i finally got it right!

29m0hf8.png

2d8qhhl.png

would've finished the box, but I'm tired of making design after design only to scrap it and start over.

opinions?

What the f**k is an appropriate signature supposed to look like?

2013 Kia Forte Koup

Pioneer AVH-X4600BT

iDMax 12

DD M1c @ 2 ohms

Rockford Prime 200.2

Pioneer 6.75" Comp Set

XS S3400, D2700

Project DB Battery Terminals

Axxess ASWC

Stinger HPM Everywhereeee

90 Sq. Ft. of Stinger Roadkill

Stock Alt

Stuff To Come

Sundown X-12

New Amp

New Comps

4 Channel Amp

My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/

My Old Build: http://www.stevemead..._+2000 +mustang

Avatar Courtesy of SnowDrifter

Posted

The sketchup part is fun lol. build it dude. looks good.

yess, i love sketchup! but after makin 10 box designs in an hour, i just wanna be done with it...for atleast 30 mins xD When the funds come around, it shall be built.

What the f**k is an appropriate signature supposed to look like?

2013 Kia Forte Koup

Pioneer AVH-X4600BT

iDMax 12

DD M1c @ 2 ohms

Rockford Prime 200.2

Pioneer 6.75" Comp Set

XS S3400, D2700

Project DB Battery Terminals

Axxess ASWC

Stinger HPM Everywhereeee

90 Sq. Ft. of Stinger Roadkill

Stock Alt

Stuff To Come

Sundown X-12

New Amp

New Comps

4 Channel Amp

My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/

My Old Build: http://www.stevemead..._+2000 +mustang

Avatar Courtesy of SnowDrifter

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 756 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...