help..

[will77530]

where do you want the port on the box bro, i understand what you need but without knowing how you want the port i cant help you out. draw a picture or something

[lovesounds_0404]

i want the port to be in the middle bro,

[will77530]

13 then it will turn then 12.25

[will77530]

switch the port to 10.5x2.25 make your life easier

[lovesounds_0404]

depth is 15",inside will be 13.5",,so the port front to back will be 11 is that right?

[will77530]

no, your using 3/4 material. you need two pieces 12x30. two 13.5x30 two 13.5x10.5 that gives you the shell for your box your first length of port will be 12 to account for the 3/4 baffle then your next port length will be 12.25.....keep the width and hieght of the port the same

[lovesounds_0404]

no, your using 3/4 material. you need two pieces 12x30. two 13.5x30 two 13.5x10.5 that gives you the shell for your box your first length of port will be 12 to account for the 3/4 baffle then your next port length will be 12.25.....keep the width and hieght of the port the same

can u give a sketch of it,lol,thanks bro

[will77530]

no dude figure it out its simple math ive helped all i can