LBM`s GroundPounder - LBM 15 x 4;RF T2500.1x 4, Termlab ->160+db !!!

[LBM]

are you putting 4 15's or 4 18's in that lil car...........and dont think it matters which one. its gonna be crazy.. good work man

There are two SMD 18`s with close to 10k+ power something like this .....

more pics!

Coming up shortly !!!

[LBM]

Back wall installed !!!

From the back, back wall !!!

This install cannot be done without this !!!!

Side walls mocked up !!!

Setting the base up !!!

Driver side installed (In Indian the cars are RHD)

Left side !!!

Both Sides !!!

Port coming up next !!!!

[LBM]

Port layout made !!!

Mocked up before fitting !!!

One side done !!!

The other side mocked up !!!

Fixed !!!

I got a very great idea from this thread...

http://www.stevemead...40#entry1372089

To use blockers to tune the enclosure !!! I have tuned the stock one close to 32 hz, and can go as low as 22 hz with port area of 7.6 sqinch per cuft !!!

Bracing of the enclosure coming up !!!!

[conceptM]

By todays standards 1010 Kilo's is truly lightweight

You sure will feel the difference once everything is installed

I haven't heard any music boxes driving around during my visit to Bombay a year ago.

Keep the updates coming. Nice to see you getting it all installed using some clever thoughts and a good will!

[LBM]

Port inside the enclosure !!!

Mocked up at position !!!

Installed and checking for bracing options !!!

Finally planned to go this way, one soild one inside..Marking done !!!

Cutting done !!!

Installed

Further bracing done for more strength

Fiber work coming up next along with CNC Laser cut amp rack !!!

[LBM]

These two are going in this ride !!!!!

Along with this !!!

[321slapinbass]

them smd's look nice

[conceptM]

Those woofers traveled a long way (and they're not light either)!

Looks like a nice amp rack

Maybe you should put the electronics list in your first post...

[LBM]

Those woofers traveled a long way (and they're not light either)!

Looks like a nice amp rack :cool:

Maybe you should put the electronics list in your first post...

Ya they traveled a very long distance !!!

Thanks for the rack !!!

Ya should put the list up but few things are yet to be finalized so waiting for the same !!!

[LBM]

List of Equipment

1. Source -> Kenwood KOS-A300
   
2. Processor -> Alpine PXA - H 701 With controller
   
3. Amp for High -> ????
   
4. Amp for Mids -> ????
   
5. Amp for Subs -> ????
   
6. Highs -> ?????
   
7. Mids -> ????
   
8. Subs -> SMD 18 inches #59 and #60
   
9. Alternator -> Mechman 220 amps
   
10. Batteries -> ???? (about 600 ah combined )
    
11. Wiring -> welding copper cable 0/1 and 0/2 runs with copper busbars
    
12. Rca -> Sommer cable with Neutrik Connectors
    
13. Enclosure -> 1 inch MDF with lots and lots of Reisn (approx 15-18 kgs with 5 kgs glass...solid as rock)