New Car need some Advice :)

[Shawn.s.]

so what i did there is 1Ohm ? or is it only 2Ohm ???

Im learning ha sry

[mbdblue]

1 ohm:

subs will get 800w so i think it should be fine.

this diagram is exactly how it should be wired to achieve 1 ohm like Kranny said.

[HypnotizedMind 91666]

^^^^^

1 final at amp,

Which will be pushin the kickers lol its 1600rms u said? Be careful with gains, as each subs could have have 800wrms

[Shawn.s.]

Yes it is a 1600 so that will be right at the max of the subs

May need bigger boxes as well :/

Okay well ill have to have some one set all the gains and things like that with a destor detector ....

now let me throw this at y'all

adding a 300w Dual amp for 2 sony xplod 4 way speackers this should be fun

This is how the car is wired now

And this is how i think about doing the extra dual

[HypnotizedMind 91666]

So you have the front tweet/driver in parallel right now and you're going for only powering (with an amp) the xplod next? It looked fine, but the tweet will be a little quieter this time around if I'm getting everything right here

You got it down though, that would work... tweets don't necessarily need the same power

[Shawn.s.]

I have not a clue if they are in Par havent looked behing the dash simply too new of a car to be riping apart

only reason i dont want to power the tweets is because ill have to take apart the dash to do so .. so i figured just make the driver and pasanger doors more powerful then the junk 20W bose speakers in there now that distort at 30 of 40 vol ... and the back seat ill just upgrade to sonys but leave those on the factory for now since the wire up was a pain to do in the first place for the sub low lev convert that connect to those now