Jump to content

The Saturn: 3 15's, AQ20 tons of fiberglass (Death-Horn) and low-lowz


Recommended Posts

How much stroner does the sand make the resin? I need to do something with my floor as its ripping on me, and thought about just fiberglassing the weak sections( ive already got deadner and ala thick layer of bedliner down also)

Not worried about looks as i will be putting carpet bsck in

Well the sand will add density so it should help a good bit by pouring a decent amount in your floor

you sir have made a Saturn cool in my book :popcorn: ready to see where this goes

Thanks, mang. Just trying to rep saturn's in the big-boy audio world in the way they should be ;):)

Team Tupperware

<First dual-alternator 'real' Saturn (pre-2002) on the planet>
(3) 15" Fi SP4's fed by (2) M3a's strapped @ .667
12.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)
Stock alt position (custom bracket) 225 amp Mechman

Roof = steel and fiberglass (u mad?)
(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)
4 power+ 4 ground runs of 1/0-gauge to rear
"If its been done before...you're doing it wrong" : )

"stfu about scores and float $hit..."

Link to comment
Share on other sites

No flex in the roof....louder. Most normal people wouldn't understand...

Team Tupperware

<First dual-alternator 'real' Saturn (pre-2002) on the planet>
(3) 15" Fi SP4's fed by (2) M3a's strapped @ .667
12.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)
Stock alt position (custom bracket) 225 amp Mechman

Roof = steel and fiberglass (u mad?)
(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)
4 power+ 4 ground runs of 1/0-gauge to rear
"If its been done before...you're doing it wrong" : )

"stfu about scores and float $hit..."

Link to comment
Share on other sites

Biggest question here is how can the subs play under control so well with such a huge port???

Also this is absolutely incredible what your doing... I thought I was being crazy when i cut my doors up for my pods... lol.

1 Crossfire XS v2 15"

2 Deka group31a's

1 XS Power D3400 (under hood)

1 Addictive Audio 500.1 :D

1 Rockford 3sixty.2

4 Crescendo pwx 6.5s

2 Pyle Pro Super tweets

1 Crescendo 1000c4

Kenwood excelon x494 Head unit

Big Three upgrade

All 0 gauge of course

1 4.56c^ft box @28hz

(New Best official db score= 151.2 @ 36hz)

Link to comment
Share on other sites

Thanks guys and the port is actually 200 sq inches just with a giant flare upto the b-pillar (not technically a horn by design)...so it's fairly moderate in size.

Team Tupperware

<First dual-alternator 'real' Saturn (pre-2002) on the planet>
(3) 15" Fi SP4's fed by (2) M3a's strapped @ .667
12.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)
Stock alt position (custom bracket) 225 amp Mechman

Roof = steel and fiberglass (u mad?)
(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)
4 power+ 4 ground runs of 1/0-gauge to rear
"If its been done before...you're doing it wrong" : )

"stfu about scores and float $hit..."

Link to comment
Share on other sites

Hey everyone. This build will, most likely, go into hibernation for the winter since I've ran out of resin @ this point and the temperatures will be dropping...along with it not being in a massive rush to be done for an event etc etc

Will be coming out strong in 2013 (if the zombie apocalypse hasn't happened...in that case, though, I'll be among the survivors...bring it on, zombies! guns+ammo are good to have...) though and will have plenty more in-store including glassing the center console straight into the floor with no seams, the whole interior will all be one fiberglass surface minus the dash area.

Beefing up the doors and adding mids, highs, and woofers to the doors+console are in-store :) stay tuned...

Team Tupperware

<First dual-alternator 'real' Saturn (pre-2002) on the planet>
(3) 15" Fi SP4's fed by (2) M3a's strapped @ .667
12.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)
Stock alt position (custom bracket) 225 amp Mechman

Roof = steel and fiberglass (u mad?)
(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)
4 power+ 4 ground runs of 1/0-gauge to rear
"If its been done before...you're doing it wrong" : )

"stfu about scores and float $hit..."

Link to comment
Share on other sites

I know :( Though I have a little itch to at least fill the roof upto factory height like the front...just dont want to go buy more supplies with christmas coming up etc etc

Team Tupperware

<First dual-alternator 'real' Saturn (pre-2002) on the planet>
(3) 15" Fi SP4's fed by (2) M3a's strapped @ .667
12.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)
Stock alt position (custom bracket) 225 amp Mechman

Roof = steel and fiberglass (u mad?)
(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)
4 power+ 4 ground runs of 1/0-gauge to rear
"If its been done before...you're doing it wrong" : )

"stfu about scores and float $hit..."

Link to comment
Share on other sites

SOLID roof you got there bro!

Edit: My roof is like vibrating too much = loss of some bass

Nissan Frontier

10" Cadence Midbass

8" Cadnece Midrange

Bullet tweets

2 Re audio Sxx 15 Subs

Mechman 270a

2 Re XT4000deV3 mono 1600 rms

1 Re XT400deV3 Bridged 350x2

2 Cadence 175.4 Bridged 350x2

Audiomaxx and Stinger 0,4,8,12 awg wires

Dynamat sound deadeners

My Build Log: http://www.stevemead...__+1999 +nissan

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1327 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...