Socky Posted October 31, 2012 Report Posted October 31, 2012 After i added deadener in my jeep, the highs are just unbelieveable after it all was applied, before it was just rattles and muffle sound. Now its just clear, the lows are better, moves little more air since its just not flexing. Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
Nate Futuristic Posted November 3, 2012 Report Posted November 3, 2012 I play a 70hz tone and set the lpf till its a steep roll off from 60 and up Set with a dd1 ofc down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups ^^ Cant wait to swalllow Ghost's babies
Guest Posted November 3, 2012 Report Posted November 3, 2012 I play a 70hz tone and set the lpf till its a steep roll off from 60 and up Set with a dd1 ofc you cant set filters with a dd1 mate
soundstream15 Posted November 3, 2012 Author Report Posted November 3, 2012 I found the prob guys, something is rattling bc when seats are up its bad and when seats are folded down its gone
Nate Futuristic Posted November 3, 2012 Report Posted November 3, 2012 I play a 70hz tone and set the lpf till its a steep roll off from 60 and up Set with a dd1 ofc you cant set filters with a dd1 mate lol i know but to make sure it doesnt clip i really see no point in the CC1 when you can just play test tones till your satified (cc1 would be faster and maybe a bit more acurate) down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups ^^ Cant wait to swalllow Ghost's babies
falcons03079313 Posted November 3, 2012 Report Posted November 3, 2012 yeah if you really want to you can use the cc-1 or the rf 3sixty series processor and you can adjust the exact lpf on your computer.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.