TUNES Posted November 20, 2012 Report Share Posted November 20, 2012 kind of new to box building as have always bought boxes off the shelf for subs but id really like to build something to get the most from my subs i payed a guy some money for a box design that i never recieved and that was last bit of spare cash before xmas i had so sadly i used the re box calculator and built a box tuned for 30hz and was 3.25cuft, box sounded terrible so is now firewood not really understanding what im doing to be honest i am hoping someone may help a fellow basshead and design a box for me maybe? i want to do all the build work and not frightened of fabrication work as im pretty handy but just get a little confused with these things heres the room in boot (trunk) i got in my wagon width 39.5" height 17.75" depth 15" really if possible would like to try and use the width so box doesnt move about subwoofers i have are these http://www.caraudiod...gzrw12s-al.html i would be so grateful of any help at all as i really want a box that will pound hard thankyou everyone Link to comment Share on other sites More sharing options...
TUNES Posted November 20, 2012 Author Report Share Posted November 20, 2012 oh and amplifier i will be using is a crystal comp 600w rms per subwoofer Link to comment Share on other sites More sharing options...
pimpnFosgates Posted November 20, 2012 Report Share Posted November 20, 2012 Could try this one Vented Box Cutsheet Wood Thickness - 0.75 Top - 38.0 x 12.0 Bottom - 38.0 x 12.0 Sides - 14.5 x 10.5 Front Back - 38.0 x 14.5 Port Sides - 10.0 x 27.25 Port Top Bottom - 4.5 x 27.25 Port Length - 27.25 Frequency - 32.17 Hz Net Volume - 2.4 ft³ Gross Volume - 3.22 ft³ Port Area - 30.0 in² Port Area Per Foot - 12.5in² Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube Link to comment Share on other sites More sharing options...
TUNES Posted November 20, 2012 Author Report Share Posted November 20, 2012 and this is big enought for 2 12S that need 1.75 cuft each? beacuse measurements seem bit small ? Link to comment Share on other sites More sharing options...
TUNES Posted November 20, 2012 Author Report Share Posted November 20, 2012 and it must be me because those measurements dont make sense, any chance of a picture to explain box design? Link to comment Share on other sites More sharing options...
pimpnFosgates Posted November 20, 2012 Report Share Posted November 20, 2012 they need 1.75 per sub. wow. gimme a sec Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube Link to comment Share on other sites More sharing options...
pimpnFosgates Posted November 20, 2012 Report Share Posted November 20, 2012 Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube Link to comment Share on other sites More sharing options...
pimpnFosgates Posted November 20, 2012 Report Share Posted November 20, 2012 port forward sub forward Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube Link to comment Share on other sites More sharing options...
zydrix Posted November 20, 2012 Report Share Posted November 20, 2012 pimpnfosgates designed, an even helped me with my box. an the box is awesome! a box design that he gives u should really do a good job. My build 98 s10 2.2 3 american bass HD 15s with psi soft parts. (on there way here) atomic at-3000.1 (soon) 146.2 outlaw @39hz., bad alt an bad batt when termed (old 2 12" build) alpine 6.5s in doors infinty 4x6s in dash. clarion cz201 HU. mechman 240a H/O alt stuff i still need. SHCA 2/0 wire SHCA 1/0 to 2/0 adapters Atomic AT-3000.1 Lots of sound deadner new mids an highs, still debating on what to do. A few Deka g31 batts. Link to comment Share on other sites More sharing options...
pimpnFosgates Posted November 20, 2012 Report Share Posted November 20, 2012 do the second one if you choose to trust my design Lucky Durango Sony hu 4 croosfire 6.5mids crossfire 600.1 mono amp American bass 1280.4 mids and highs amp aq hdc3 12 2.4 cube net box, tuned to 34 and 14.4 inches of port per cube Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.