blackandgoldl69 Posted January 13, 2013 Report Share Posted January 13, 2013 so i was talking to a buddy at work and he said he had a set of tires to sell cheap. Turns out they are 275/60/15 firehawk indy 500's with about 400 miles on them. I couldnt pass them up at 125 dollars for the whole set. So i installed them on my s10. I have 8.5 rims and the back tires clear fine but the front tires rubs\ about a quarter turn from full lock. Is there any way to fix the rubbing. I was thinking of either removing the inner fender or trying to use a hammer to gain some clearence. Any ideas? Link to comment Share on other sites More sharing options...
Freshman6969 Posted January 13, 2013 Report Share Posted January 13, 2013 take out the covers inside the fender? or are you hitting the fender itself Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
blackandgoldl69 Posted January 13, 2013 Author Report Share Posted January 13, 2013 its rubbing inside the fenderwell i already rolled the outer fenders. Link to comment Share on other sites More sharing options...
Trey_Dog650 Posted January 13, 2013 Report Share Posted January 13, 2013 Shave it down so that it doesn't rub. Talking about the plastic cover. 13 Kia Forte Build! 07 Hyundai Accent Build ***Super Seller*** N8ball2013 And then he gets to say ok all you guys were right. im sorry for being a dummy poo poo head. Link to comment Share on other sites More sharing options...
blackandgoldl69 Posted January 13, 2013 Author Report Share Posted January 13, 2013 my inner fenders are metal but yeah same thing anything i can do about it rubbing the sway bar? Link to comment Share on other sites More sharing options...
jbondox Posted January 22, 2013 Report Share Posted January 22, 2013 A hammer... lol I find this funny as I just went through this on a vehicle for a customer and we spent days getting it right... I want to send him this. Btw, not laughing at you, just find it amusing with the situation I inherited and it being 5am SMD SuperSeller VerifiedJbondoXJames Shields Link to comment Share on other sites More sharing options...
Carbon Posted January 22, 2013 Report Share Posted January 22, 2013 my inner fenders are metal but yeah same thing anything i can do about it rubbing the sway bar? Try a thin spacer Link to comment Share on other sites More sharing options...
jbondox Posted February 6, 2013 Report Share Posted February 6, 2013 Swap the rears with the front j/k SMD SuperSeller VerifiedJbondoXJames Shields Link to comment Share on other sites More sharing options...
Carbon Posted February 6, 2013 Report Share Posted February 6, 2013 my inner fenders are metal but yeah same thing anything i can do about it rubbing the sway bar? If its rubbing the fender You can flare it our with a roller "rolling the fenders" And if its rubbing on your suspension you can use a spacer, like a .25-.5.in Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.