loganberry Posted February 5, 2008 Author Report Share Posted February 5, 2008 ok, so i found a box that i might be able to make work...but i wont have a place for the amps, but here is my question, are there any subs under 6" mounting depth that will pound very hard in a sealed box? i dont have the space for a box big enuf for ported or vented (no competeing it sounds like) but idk what to do Quote My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk Link to comment Share on other sites More sharing options...
Guest Nismofreak Posted February 5, 2008 Report Share Posted February 5, 2008 one thing left....4 15 blowthru...j/p Quote Link to comment Share on other sites More sharing options...
loganberry Posted February 5, 2008 Author Report Share Posted February 5, 2008 one thing left....4 15 blowthru...j/p thats ideal, and i would give my left nut to do that, but i carry around a quad nvm i take that back, id like to keep both of em.. Quote My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk Link to comment Share on other sites More sharing options...
loganberry Posted February 5, 2008 Author Report Share Posted February 5, 2008 (edited) also the box im looking at is a sealed box that takes up all the space of the back seats, no place to mount the amps, any suggestions there? also whats better down firing, or making them fire up into the seats *the seats are leather, idk if that matters* and i need some hard hitting 10"s that are around 5.75 in mounting depth..no larger oh and ima need the space for a 800.4 and a t1k for the subs, so they have to b ran by that, and i need to find a place to mount both amps and 2 subs..omg it would b much easier if i could take down the back part of the back seat.. Edited February 5, 2008 by loganberry Quote My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk Link to comment Share on other sites More sharing options...
XtremeSPL-SCAMMER Posted February 5, 2008 Report Share Posted February 5, 2008 its not a migrane its a gd bullet in the head, its a 04 f-150 fx4, i love the truck alot, but cmon ford, why not make it easy for me...i REALLY REALLY REALLY!!!! i wanna go with a dc lvl 4, but idk if ill have enuf box for a single 10 or 12 under the seat, i think i can make the amps fit somwhere else...but then again no damn room for a second battery...fuck ford...USE THE SPACE BETTER!! there isnt a lever on the backside of the rear bench?? look on the passenger side, toward the base.. my dads truck is like this, but there is a small black lever that kinda hides away.. makes the top half of the bench move foward.. Quote IM A LOW LIFE SCAMMER SO I WAS BANT....TEH HAMMA is NOT my friend Link to comment Share on other sites More sharing options...
loganberry Posted February 5, 2008 Author Report Share Posted February 5, 2008 there isnt a lever on the backside of the rear bench?? look on the passenger side, toward the base.. my dads truck is like this, but there is a small black lever that kinda hides away.. makes the top half of the bench move foward.. i dont think there is, does he have the fx4 extended cab as whell? Quote My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk Link to comment Share on other sites More sharing options...
loganberry Posted February 5, 2008 Author Report Share Posted February 5, 2008 (edited) i just went out and looked, didnt see shit, ima check the manual...i hope im just having a dumb moment, cause that would make doing a system so much easier, i dont see why they wouldnt make that part able to come down and aparently i have the superCab when did they stop calling it extended cab Edited February 5, 2008 by loganberry Quote My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk Link to comment Share on other sites More sharing options...
XtremeSPL-SCAMMER Posted February 5, 2008 Report Share Posted February 5, 2008 i just went out and looked, didnt see shit, ima check the manual...i hope im just having a dumb moment, cause that would make doing a system so much easier, i dont see why they wouldnt make that part able to come downand aparently i have the superCab when did they stop calling it extended cab the size of the cab.. the older trucks are all extended cabs.. then they went to crew cabs, quad cab, super cab.. all the 4 door models, that i know of do have this lever.. my dads 98 f250 quad cab has it.. my 01 ford f150 had it.. but the bottom of the bench folded up.. so if the bottom folds up, the back peice is there for good.. it dont move.. but if you cant fold the bottom up or anything then the top folds down. Quote IM A LOW LIFE SCAMMER SO I WAS BANT....TEH HAMMA is NOT my friend Link to comment Share on other sites More sharing options...
loganberry Posted February 5, 2008 Author Report Share Posted February 5, 2008 the size of the cab.. the older trucks are all extended cabs.. then they went to crew cabs, quad cab, super cab.. all the 4 door models, that i know of do have this lever.. my dads 98 f250 quad cab has it.. my 01 ford f150 had it.. but the bottom of the bench folded up.. so if the bottom folds up, the back peice is there for good.. it dont move.. but if you cant fold the bottom up or anything then the top folds down. the bottom folds up...thats where i was gonna make a box for 2 10"s, so i guess what i wanna do now is, take the single seat that the bottom comes up, put 1 amp on the bottom, and put 1 amp right under the seat (screw it to the seat) so its like 2 amps on top of eachother (if thats ok, ima get a 800.4 and t1k, i think there same size) then on the dual seat part i can make a sealed box (i dont think i have enuf room for a ported) for two 10" or 12" subs, you have any ideas for subs around 5.75 mounting depth? that pound in sealed boxes, plus whats the upside downside (no pun intented) to downfireing subs...and upfiring subs Quote My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk Link to comment Share on other sites More sharing options...
XtremeSPL-SCAMMER Posted February 5, 2008 Report Share Posted February 5, 2008 the bottom folds up...thats where i was gonna make a box for 2 10"s, so i guess what i wanna do now is, take the single seat that the bottom comes up, put 1 amp on the bottom, and put 1 amp right under the seat (screw it to the seat) so its like 2 amps on top of eachother (if thats ok, ima get a 800.4 and t1k, i think there same size) then on the dual seat part i can make a sealed box (i dont think i have enuf room for a ported) for two 10" or 12" subs, you have any ideas for subs around 5.75 mounting depth? that pound in sealed boxes, plus whats the upside downside (no pun intented) to downfireing subs...and upfiring subs yeah.. so then the back rest part doesnt move.. the bottoms fold up.. I never fucked around down fireing subs.. they look cool.. but.. man.. i am a old fashioned guy.. i still feel you better results with subs ina box.. then downfireing.. but.. i have heard some alphine 12's type r's that fucken POUND in a sealed box.. and the box doesnt have to be all that great.. Quote IM A LOW LIFE SCAMMER SO I WAS BANT....TEH HAMMA is NOT my friend Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.