Miguels Posted April 8, 2013 Report Posted April 8, 2013 why didnt you just buy the crossovers crescendo sells? These are our in-line crossovers designed for the FT1, FT1-SE and other super tweeters. Designed with a 5 khz High pass 12db/oct slope, they are a perfect match to get the most out of your FT1's Available in 4 or 8 ohm 1 crossover is needed per tweeter Sold per peice my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
Carbon Posted April 8, 2013 Author Report Posted April 8, 2013 that soundstream should work on the tweets The soundstream will work just fine. You can high pass them right at 4K and it be fine. My supertweets were always to harsh for me at 3.5 so 4 has always been my happy ground. Sounds good guys. Stupid question...But Each tweet can take around 75W I believe. How should I wire them to the amp? I assume this will be the setup: Soundstream TX4.560 on 4 Pwx 6s Soundstream TX4.560 on 2 FT1-SEs
Carbon Posted April 8, 2013 Author Report Posted April 8, 2013 why didnt you just buy the crossovers crescendo sells? These are our in-line crossovers designed for the FT1, FT1-SE and other super tweeters. Designed with a 5 khz High pass 12db/oct slope, they are a perfect match to get the most out of your FT1's Available in 4 or 8 ohm 1 crossover is needed per tweeter Sold per peice Dammit! I did not even see these Do I need them?
Miguels Posted April 8, 2013 Report Posted April 8, 2013 if you want to run them on the same amp as the 6.5 yes. i used them like that and it sound good my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
Carbon Posted April 8, 2013 Author Report Posted April 8, 2013 Well...The xover they sell is passed at 5KHz. The SS amp looks like it can be set for 4KHz. the LPF looks like it can be set up to 20KHz if I'm not mistaken.
Carbon Posted April 8, 2013 Author Report Posted April 8, 2013 The soundstream will work just fine. You can high pass them right at 4K and it be fine. My supertweets were always to harsh for me at 3.5 so 4 has always been my happy ground. So in this case the SS amp I already have should work for these?
Miguels Posted April 8, 2013 Report Posted April 8, 2013 whats the cost on that one? look at this one http://www.amazon.com/SAX-125-2-Sundown-Audio-2-Channel-Amplifier/dp/B003ZWD7QE my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
Chris Hammer Posted April 8, 2013 Report Posted April 8, 2013 Yes your amp will work...just pass them at 4khz. MY BUILD *****http://tinyurl.com/gmcbuild***** Vehicles 2005 GMC Canyon CB1000r - Currently where any future funds are going. (exhasut,bazzaz, ohlins shock, screen, etc.) crf250r - Used to be race bike..now I just trail ride..practice at the track on it. CH80 - Daily beater (when nice weather)best 150$ ever spent. 100+mpg Sold to: Skullz - pstone11 - Leo1103 - Volvo 63' - pavelpardo - imnew59585 Shower farts still piss me off.I think theyre pretty neat. When the water runs down your crack as you let one out... its like shitting in a crockpot.
Miguels Posted April 8, 2013 Report Posted April 8, 2013 SS should be good enough.. thought you wanted to purchase one my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
Carbon Posted April 8, 2013 Author Report Posted April 8, 2013 SS should be good enough.. thought you wanted to purchase one Yes your amp will work...just pass them at 4khz. Sounds good guys! This is temporary till I get the DC 175.4. Just trying to get shit built lol
Recommended Posts
Archived
This topic is now archived and is closed to further replies.