Jump to content
Second Skin Audio

Need A Box Design (ported)


Recommended Posts

Well the box is complete gonna get some of the pics uploaded havent put the subs in yet, But you that the 2 Ts-w5102's weigh 75lbs a piece and the box another 75 or more. So we are looking at 225+lbs in a trunk this thing is gonna be heavy. Got get the airshocks off the blown olds and put on the caddy with just the single 12 in the trunk + box is about 115lbs and the rear end in squatting bad.

Thanx again amatt85

Edited by wL<3bass

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Well its pretty gay to say the least all that work for nothing, theres something wrong with the voice coils, it hits but it makes and unbearable scratching sound, a sound I have never heard in my life.

For the record the sub, amp, and everything was wired properly, must be a faulty woofer. Check on multiple amps rewirded and its just bad bad bad bad.

Edited by wL<3bass

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Well its pretty gay to say the least all that work for nothing, theres something wrong with the voice coils, it hits but it makes and unbearable scratching sound, a sound I have never heard in my life.

For the record the sub, amp, and everything was wired properly, must be a faulty woofer. Check on multiple amps rewirded and its just bad bad bad bad.

I hate to hear that, I have had the same thing happen to me when I bought a kove armageddon and it was used but I got it for like 40 bucks and it sounded good till half volume and then it roared on a good note, I ended up finishing it off with a wall socket.

dc lvl 4xl 12

kicker zx1500

2 sets of kicker ds6.5s

optima yellow top (extra batt) with big 3

1/0 guage and 3 150amp anls

eclipse cd5000 headunit

Link to comment
Share on other sites

I hate to hear that, I have had the same thing happen to me when I bought a kove armageddon and it was used but I got it for like 40 bucks and it sounded good till half volume and then it roared on a good note, I ended up finishing it off with a wall socket.

Too bad I didn't pick it up for $40 I wish :mad: , the shipping on the thing was more than that....it was over $300 + the brand new Hifonics BXi20006d and the guy wont respond so basically that money is down the drain. Talked to Pioneer and they don't sell soft parts nor do they repair subs..... So basically have a 75+lbs of box that takes up space and a 75lb massive paper weight. I don't know what to do, I might get my dad to throw the box back in and use the blown woofer as a passive radiator. Hate to say it but after this I don't think he is gonna do anymore car audio installs, for him at least, I was sick too and worked on this thing for like 20 hours... in the cold like 20 degrees outside with little or no heat the whole time.

The sad thing is before we ever added all this stuff I wanted to test the woofer but figured it wasn't necessary..... OHHHH how I was extremely negligent and lazy in not doing so. After this episode I'M NEVER BUYING ANOTHER THING OF ANY SORT OF VALUE OFF THE INTERNET UNLESS ITS FROM AN AUTHORIZED RETAILER :excl: :excl: :excl: :excl: :angry: :angry: :angry: :angry:

BTW this is all in my dad's caddy not my car cause im a poor high school kid that loves audio & BASS!

Edited by wL<3bass

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

  • 2 weeks later...

Well we bought another sub, have some pics, the battery cover isn't put back together but you can get the idea

Picture034.jpg

Picture022.jpg

Picture021.jpg

Picture027.jpg

Picture028.jpg

Picture028.jpg

Picture025.jpg

Picture029.jpg

Picture030.jpg

Picture036.jpg

Picture037.jpg

OMG it is SOOOOO LOUD, IMA have to borrow a minidv cam from work and get a video. This is the first system that made my ears really hurt... It is LOUD. Everything shakes on the car, I would def say that these subs will give a btl a run for its money

Siggy.png
Link to comment
Share on other sites

This is the first car with subs in trunk that actually made my ears hurt (felt like some1 was stabbing my ear drums with a screwdriver)

Edited by wL<3bass

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Picture037.jpg

If you look that is two Hifonics BXi2006d stacked about 1/2inch of space (they dont get warm at all some heat is no prob)

The wires are a mess this is temp until it gets warmer and we can really make it hot, still need to get new power wire, HO alt, Kinetik hc2400 maybe two.

That is some locomotive wire my dad got from work it got a hypalon jacket and its tough to strip lol, but 0gauge nonetheless.

Edited by wL<3bass

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 523 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...