deca Posted February 13, 2008 Report Posted February 13, 2008 is it better for these subs to be sealed or vented? this is for a ls430? if vented could i run the ports in the car? would it make a diff? Quote
dmanson Posted February 13, 2008 Report Posted February 13, 2008 is it better for these subs to be sealed or vented? this is for a ls430? if vented could i run the ports in the car? would it make a diff? vented would get louder and you can tune it to whatever you'd like ............. and yes going vented would make a difference vs sealed. Quote 2-DC 15XLM2 D.7s 1-DC 5K amp (1) XS Power D6500(UNDERHOOD) and (1) XS3000(REAR) 3 runs 1/0ga for power and 2 runs of 1/0ga for negative. (2)-RFT165s components, ...... 4 separate 1 inch tweetersRF T600-2(fronts) Punch 450.4(rear) Audiocontrol 3.1. DC power 260amp alternator w/MLA Module
korndog2003 Posted February 13, 2008 Report Posted February 13, 2008 If you want loud bass go vented, if you want sound quality go sealed, my Kicker L7 Hammers being vented... Quote
aznboi3644 Posted February 13, 2008 Report Posted February 13, 2008 why do people always think sealed = sound quality and ported = loud bass. its all about the design and install...I'd go ported for sound quality and overall loud bass Quote
Kicker Guy Posted February 14, 2008 Report Posted February 14, 2008 why do people always think sealed = sound quality and ported = loud bass.its all about the design and install...I'd go ported for sound quality and overall loud bass because no one has told/showed them different its kinda like saying a BTL can't sound good because they are meant for more SPL.... Quote Head Unit: Pioneer DEH-P6000UB Sub Amp:American Bass VFL 500.1 Subs: 4 Fi BL 18's Enclosure:21.5 Cubic foot flat wall tuned to 40 hz Batteries: 3 Kinetik 2400's in the back, Kinetik 1200 under hood. Mids & Highs: 4 Kicker DS 6.5 coax in doors, 2 Kicker DS coax in pillars Highs Amp: Kicker kx250.2, kx100.2 Wire: 4 Runs 1/0 gauge Knukonceptz
dmanson Posted February 15, 2008 Report Posted February 15, 2008 my first box was sealed. i went ported and never looked by. i like the low and loud bass. Quote 2-DC 15XLM2 D.7s 1-DC 5K amp (1) XS Power D6500(UNDERHOOD) and (1) XS3000(REAR) 3 runs 1/0ga for power and 2 runs of 1/0ga for negative. (2)-RFT165s components, ...... 4 separate 1 inch tweetersRF T600-2(fronts) Punch 450.4(rear) Audiocontrol 3.1. DC power 260amp alternator w/MLA Module
Sp33dyG Posted February 15, 2008 Report Posted February 15, 2008 ported = lower/smoother bass sealed = punchier/tigher bass Quote the only person i wouldnt let build my box would be Ray. Team Heavy-Flex4 SA 12's tuned to 29hz Ampere Audio 3800.1 @ 1 ohmXS Power D3100Big 3Stock alt
gotFI? Posted February 15, 2008 Report Posted February 15, 2008 ported = lower/smoother bass sealed = punchier/tigher bass smart fella right here Quote
aznboi3644 Posted February 15, 2008 Report Posted February 15, 2008 ported = lower/smoother bass sealed = punchier/tigher bass Properly designed ported system can be just as transient but generally speaking yes you are correct Quote
pstone11 Posted February 15, 2008 Report Posted February 15, 2008 because no one has told/showed them different its kinda like saying a BTL can't sound good because they are meant for more SPL.... My BTL's sound beautiful. Loud, but nice all the same.. Quote Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.