DC level 4-15?

[Dbaddict]

Ok, so I built a 2.8 cu ft ported box strictly for SPL use. My question is power handling... What is max I could put to the sub before it goes up in smoke?? 2000?-3000 Watts? Only for burps. I will post pics of the box with my homemade 6" flared aeroport soon as its complete.

[Pro7]

If its for spl you will probably want a bigger aeroport but I could be wrong

And you will be limited by the thermal limits of the 2.5in coil if its m1 or 3" I believe if its m2

[Nate Futuristic]

If its for spl you will probably want a bigger aeroport but I could be wrong

And you will be limited by the thermal limits of the 2.5in coil if its m1 or 3" I believe if its m2

the level 4 is 3 inch for both m1 and m2

different soft parts i believe

id do 2-2.5k for short burps but thats just me you will have to test and tune

and i think you will want a little more port area if the box is not built yet look into a 8inch areo

[Dbaddict]

If its for spl you will probably want a bigger aeroport but I could be wrong

And you will be limited by the thermal limits of the 2.5in coil if its m1 or 3" I believe if its m2

I have 10" pvc also...I could make a flared aero out of that if you think that would be better.

[WCA Rusty]

Peak power for people in SPL is all found by testing the limits of a sub in your application, everyone's going to find different limits based on there rest of there set up. Theres a vid floating around on you tube somewhere of some SPL guys in Italy burping a single m1 Lv3 with 17K =]

[TNichy]

Peak power for people in SPL is all found by testing the limits of a sub in your application, everyone's going to find different limits based on there rest of there set up. Theres a vid floating around on you tube somewhere of some SPL guys in Italy burping a single m1 Lv3 with 17K =]

17K...... That's just crazy.