chad190 Posted April 18, 2013 Report Posted April 18, 2013 Alright guys, i was wondering what kinda wiring i'll need to first run one Hifonics Zeus 3000.1D ? probably at 1 ohm then what would i need to be running two of the Zeus 3000's ? I only have big 3 right now, (just purchased new Jeep) 2006 Monte Carlo Pioneer DEH-80PRS 2 SSA ZCON 12's 5 Cube Box tuned to 32 Hz Soundqubed 3500.1 PAC LC-1 Singer 320 Amp Alt XS D3100 & Kinetik HC2400 in trunk Super Start AGM Under Hood 80ft+ Sky High 1/0 40 ft^3 120mil sky high deadener Soundqubed Pro Audio 6.5" mids Soundqubed Super Tweeters Alpine 1" Tweeters Alpine MRP-F300
OrzechNJ Posted April 19, 2013 Report Posted April 19, 2013 first of all u need some extra batteries if u wanna run 6k rms.. at least 3 runs of 0 gauge , two pos one neg, and as big alternator as u can afford... sometimes Loud is NOT pretty Sounds like its safe to go ahead and bend that ass over.
ric006 Posted April 19, 2013 Report Posted April 19, 2013 and personally i would use a relay to connect your amps remote wires so it doesnt strain your HU if you need one let me kjnow
chad190 Posted April 19, 2013 Author Report Posted April 19, 2013 Alright, thanks guys 2006 Monte Carlo Pioneer DEH-80PRS 2 SSA ZCON 12's 5 Cube Box tuned to 32 Hz Soundqubed 3500.1 PAC LC-1 Singer 320 Amp Alt XS D3100 & Kinetik HC2400 in trunk Super Start AGM Under Hood 80ft+ Sky High 1/0 40 ft^3 120mil sky high deadener Soundqubed Pro Audio 6.5" mids Soundqubed Super Tweeters Alpine 1" Tweeters Alpine MRP-F300
Recommended Posts
Archived
This topic is now archived and is closed to further replies.