ThreehundredC Posted May 7, 2013 Report Share Posted May 7, 2013 So tonight after many times of backing out of the idea i removed and drilled and cut apart my Chysler 300C door panels i have at the moment 2 selenium 8s and 2 st400 super tweets one for each Front door i want to go with 2 8s and 2 super tweets should i just make the spot for it and leave it empty for now My main reason for posting is Heres where i am in my doors i need some guidance where do i go from this point Link to comment Share on other sites More sharing options...
ThreehundredC Posted May 7, 2013 Author Report Share Posted May 7, 2013 my plan was to cut away that lip in the center where it starts after the speaker grill hole and then taking the wood and making that wall thats already there all the way across then build up the rings off that then wrap to the outer edges Link to comment Share on other sites More sharing options...
ThreehundredC Posted May 7, 2013 Author Report Share Posted May 7, 2013 hello kind people of the forum can some one one tel me should i build a whole wood face for the bottom section or just make rings on stilts over the pocket area and a ring where the speaker grill was and is now a hole do i mould the whole door then build off that ? im trying to use the least amount of resin possible Link to comment Share on other sites More sharing options...
XmaximuS Posted May 7, 2013 Report Share Posted May 7, 2013 im trying to use the least amount of resin possible. Ditto.. You may want to look into that new sun activated resin the SMD is putting out soon.. MY BUILD LOG>>>> NAH I BETTER NOT.. Link to comment Share on other sites More sharing options...
ThreehundredC Posted May 7, 2013 Author Report Share Posted May 7, 2013 BUMP Link to comment Share on other sites More sharing options...
ThreehundredC Posted May 7, 2013 Author Report Share Posted May 7, 2013 do i make a thin mold of the bottom half of the door with the rings in it and just overlay the holes and pocket,, or do i piece together wood behind the door and just body fill the gaps with resin n glass Link to comment Share on other sites More sharing options...
Rell Posted May 8, 2013 Report Share Posted May 8, 2013 Are wanting a type of pod, something that bolts/mounts to the door panel? Or do you want it to be one solid door? Can you upload a few more pics of the doors? Few up close shots at different angles, and a closer shot of the area you cut up. Link to comment Share on other sites More sharing options...
ThreehundredC Posted May 8, 2013 Author Report Share Posted May 8, 2013 Link to comment Share on other sites More sharing options...
ThreehundredC Posted May 8, 2013 Author Report Share Posted May 8, 2013 the "grill square and the pocket L shaped peice i drilled out the rivits on the back didnt cut anything yet Link to comment Share on other sites More sharing options...
ThreehundredC Posted May 8, 2013 Author Report Share Posted May 8, 2013 this is wher ei got the idea to make the pod on the door insted but i like the look and ease of build this style better Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.