ThreehundredC Posted May 16, 2013 Author Report Share Posted May 16, 2013 well the tweeter i wanted flush under the wood but it was too keep it was bending the wood more than id like do it has to go on the outside like normal gunna have to cut some rings and angle them to get the 8 to fit its not deep enough from the door and id like to get a little angle Link to comment Share on other sites More sharing options...
HunterJohnson Posted May 17, 2013 Report Share Posted May 17, 2013 If you need flush trim rings hmu. Also rell pretty much explained everything and how to do it Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass Link to comment Share on other sites More sharing options...
ThreehundredC Posted May 17, 2013 Author Report Share Posted May 17, 2013 i put them in a way that i left room for the second tweeter and speaker later might do a horn instead of another st400 tweeter but anyways heres the passenger door just finished it up late night ill do some touch ups in the morning after it dries it looks like a lotta gator down there but once you fill it with another 8 and tweeters it should break it up enough need soem kinda grill for the 8s Link to comment Share on other sites More sharing options...
ThreehundredC Posted May 17, 2013 Author Report Share Posted May 17, 2013 i took a hammer to those screw bumps and it knocked em down pretty good Link to comment Share on other sites More sharing options...
shogen Posted May 18, 2013 Report Share Posted May 18, 2013 looks ok man... hoping my first set looks as good i took a hammer to those screw bumps and it knocked em down pretty good Pioneer Premier P880PRS ll Front Stage: US Acoustics 4060 - Random speakers currently ll Sub Stage: Crescendo BC3500D - 15" Xcon sealed @ 3.28 cubes ll Electrical: - Kinetik HC1800(front) NEW***DieHard P-2(rear) beaker- I know this sounds like a lot of anime bullshit, but it is true. Link to comment Share on other sites More sharing options...
ThreehundredC Posted May 18, 2013 Author Report Share Posted May 18, 2013 i was thinking of making some kinda trim top cover with another material to kinda make it look nicer like a beauty panel idk Link to comment Share on other sites More sharing options...
Ruck918 Posted June 14, 2013 Report Share Posted June 14, 2013 Looks good I have a 300c and want to put 8" crescendo pwx's in my front doors. Link to comment Share on other sites More sharing options...
Crandis16 Posted June 14, 2013 Report Share Posted June 14, 2013 still need help with this??? I took the same route you did and just dove in and learned along the way lol not bad for a first time, but I find that after the first time you realize what you did wrong and what you would like to do when you rebuild the doors... I know I do anyway lol My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL Link to comment Share on other sites More sharing options...
ThreehundredC Posted July 1, 2013 Author Report Share Posted July 1, 2013 yea there are a a few things i would do different on these they arnt the greatest i was gunna make em nicer but a worse problem happened the dang tweeters ive had since brand new that used to play on my old set up crossed way up at 13.5k took em off set em in the factory boxes for about 6 months now ..no music no noise nothign plays out of both how can this be how could they both "blow" or stop working at the same time when i took them out they were playing nice Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.