BASS14 Posted February 17, 2008 Report Share Posted February 17, 2008 Ok so i just ordered a RF T1k and i would like to build an amp rack....and clean my system up a bit!! so that is my ? to guys is wat would you do to clean it up a bit. and yea i know the first thing you will say is get the wires out of the ports. and that will be done when i get my amp i am gonna buy terminals to put in the box to take care of that. and all those dist. blocks will be gone too. they are only in there because i have neons in my truck and they are running of the amp as well. They are the green wires that you will see in the pics....and then the really little white and black wires r for the neons as well.idk if you can c them or not but they are there. Do you guys have ne ideas on where i could put the amp in the last two pics?? Quote Vehicle-2014 Ford Fusion on 20" cruiser alloy obsessionsSubs-4 8" sundown audio E8v3 Sub Amp-Hifonics Brutus Elite 1200.1box-2.8cubes after all dis tuned to 32hz 4" aeroMids and highs-2 sets of Memphis PR 6.5 components Mids amp-Hifonics Brutus Elite 800.4 Deck-Factory IntegrationWiring-Memphis40sqft of damplifier Pro http://www.youtube.c...14?feature=mheeSMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
BASS14 Posted February 17, 2008 Author Report Share Posted February 17, 2008 come on guys.....i am open to any suggestions. i want to clean it up a bit. so i am comming to the expierenced for help. Quote Vehicle-2014 Ford Fusion on 20" cruiser alloy obsessionsSubs-4 8" sundown audio E8v3 Sub Amp-Hifonics Brutus Elite 1200.1box-2.8cubes after all dis tuned to 32hz 4" aeroMids and highs-2 sets of Memphis PR 6.5 components Mids amp-Hifonics Brutus Elite 800.4 Deck-Factory IntegrationWiring-Memphis40sqft of damplifier Pro http://www.youtube.c...14?feature=mheeSMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
XtremeSPL-SCAMMER Posted February 17, 2008 Report Share Posted February 17, 2008 ok... when you run wires, hide them.. either run them under the carpet, or behind the pannels... If you want to build an amp rack, i would so it hides a lot of the wires... you can high up the wires a bit. instead of them being loose and look like shit get a couple zip ties and clean it up.. Quote IM A LOW LIFE SCAMMER SO I WAS BANT....TEH HAMMA is NOT my friend Link to comment Share on other sites More sharing options...
littleitaly1990 Posted February 17, 2008 Report Share Posted February 17, 2008 All you really have to do is hide the wires...other than that it looks real good Quote A vitrolic, megalomaniacal sadistic psychopath. Link to comment Share on other sites More sharing options...
XtremeSPL-SCAMMER Posted February 17, 2008 Report Share Posted February 17, 2008 since you are in an extended can pick up, put the amp on the floor board under the seat or somewhere hidden.. a spot it gets air, and you get rid of all that shit on the box.. the fuses, etc.. then you can run the wires under the carpet... Keep it simple... Quote IM A LOW LIFE SCAMMER SO I WAS BANT....TEH HAMMA is NOT my friend Link to comment Share on other sites More sharing options...
BASS14 Posted February 17, 2008 Author Report Share Posted February 17, 2008 since you are in an extended can pick up, put the amp on the floor board under the seat or somewhere hidden.. a spot it gets air, and you get rid of all that shit on the box.. the fuses, etc.. then you can run the wires under the carpet... Keep it simple... i wanted it under the seat but they dont fit....that is why it is on the box.the wires do run under the carpet they come out of the carpet about a foot and a half away from the amp. Wat i might do is keep the amp on the box just get rid of all the shit...and move the amp closer to the wires and so i dont have to have so much of them showing. or i could put it under the box and then run them under the carpet and then put a slice in the carpet rite to the amp so you will only c bout a inch of em?? Quote Vehicle-2014 Ford Fusion on 20" cruiser alloy obsessionsSubs-4 8" sundown audio E8v3 Sub Amp-Hifonics Brutus Elite 1200.1box-2.8cubes after all dis tuned to 32hz 4" aeroMids and highs-2 sets of Memphis PR 6.5 components Mids amp-Hifonics Brutus Elite 800.4 Deck-Factory IntegrationWiring-Memphis40sqft of damplifier Pro http://www.youtube.c...14?feature=mheeSMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
XtremeSPL-SCAMMER Posted February 17, 2008 Report Share Posted February 17, 2008 i wanted it under the seat but they dont fit....that is why it is on the box.the wires do run under the carpet they come out of the carpet about a foot and a half away from the amp.Wat i might do is keep the amp on the box just get rid of all the shit...and move the amp closer to the wires and so i dont have to have so much of them showing. or i could put it under the box and then run them under the carpet and then put a slice in the carpet rite to the amp so you will only c bout a inch of em?? put thefucken amp on the backside of the box.. clean it up.. or hide the fucker... IMO Quote IM A LOW LIFE SCAMMER SO I WAS BANT....TEH HAMMA is NOT my friend Link to comment Share on other sites More sharing options...
BASS14 Posted February 17, 2008 Author Report Share Posted February 17, 2008 the box is tight up agains that back wall. yea i will figure something out i guess!! Quote Vehicle-2014 Ford Fusion on 20" cruiser alloy obsessionsSubs-4 8" sundown audio E8v3 Sub Amp-Hifonics Brutus Elite 1200.1box-2.8cubes after all dis tuned to 32hz 4" aeroMids and highs-2 sets of Memphis PR 6.5 components Mids amp-Hifonics Brutus Elite 800.4 Deck-Factory IntegrationWiring-Memphis40sqft of damplifier Pro http://www.youtube.c...14?feature=mheeSMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
white_boi_audio Posted February 17, 2008 Report Share Posted February 17, 2008 Have you ever tryed the box with the higher side to the back of the truck?? You could build a amp rack coming off the front of the box and mount your new amp their!! Quote "MY RIDE" 1987 Chevy Cavalier Z24 2.8L V6 -- CB Radio with PA speaker Head Unit: 7 inch Jensen Flip-out -- Speakers: 4 Visonik 6 1/2s and 4 Visonik 6x9s Subwoofer: One Audiobahn 18 - Sub Amp: Power Acoustik OV1-2000d 2000 watt monoblock amp -- Battery in back - Kinetic HC600 -- Sub box: Custom built 5 cubic foot tuned to 30 hertz Coming soon: Bigger Highs Amp, Power inverter "WhItE bOi AuDiO" "FEAR THE DUCK" Link to comment Share on other sites More sharing options...
BASS14 Posted February 17, 2008 Author Report Share Posted February 17, 2008 (edited) Have you ever tryed the box with the higher side to the back of the truck?? You could build a amp rack coming off the front of the box and mount your new amp their!! do you mean comming off of the higher side down?? or the lower side going up?? Edited February 17, 2008 by BASS14 Quote Vehicle-2014 Ford Fusion on 20" cruiser alloy obsessionsSubs-4 8" sundown audio E8v3 Sub Amp-Hifonics Brutus Elite 1200.1box-2.8cubes after all dis tuned to 32hz 4" aeroMids and highs-2 sets of Memphis PR 6.5 components Mids amp-Hifonics Brutus Elite 800.4 Deck-Factory IntegrationWiring-Memphis40sqft of damplifier Pro http://www.youtube.c...14?feature=mheeSMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.