Jump to content

SojiaRaggs9000's SuperCharged 08 Chrysler 300 3.5L V6 - UBL


Recommended Posts

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

First off thank you for taking a look at my thread, Hopefully you like what you see. OK so I have a 2008 Chrysler 300 Limited which I bought back in December of 2011. Here are a few pics of it at the dealership

2008_Chrysler_300_139425__3.jpg

2008_Chrysler_300_139425__4.jpg

2008_Chrysler_300_139425__2.jpg

2008_Chrysler_300_139425__6.jpg

It has a really nice tan leather interior with a light wood grain.

2008_Chrysler_300_139425__7.jpg

2008_Chrysler_300_139425__8.jpg

2008_Chrysler_300_139425__18.jpg

2008_Chrysler_300_139425__9.jpg

Then came the mods. tasteful, not over the top. Its not 100% done yet but Im going for a beefy / sporty look. All I lack is a SRT 8 front lip, trunk lip and AAC Halos. MAYBE some stripes. The mods consist of: Grip Grille with a custom modded 2010 Chrysler 300 "s" Wing Emblem (silver Chrysler ribbons rather than the OEM gold ones, 20" Chrome Challenger rims, Chrome Handles, Chrome Mirrors, Darker window tint. Custom mandrel bent dual exhaust consisting of 1 FlowMaster Super 40 and 2 4" chrome resonated tips.

100_1762.jpg

100_1533.gif

100_1764.jpg

100_1765.jpg

100_1766.jpg

100_1536.gif

100_1767.jpg


100_1538.gif

New video on post #18. Enjoy!!

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

  • Replies 21
  • Created
  • Last Reply

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

A few minor mods where added. WeatherTech FloorLiner floor mats. These things are great. I live in west Texas... dust, dirt rocks and all kinds of wild shit get tracked into my car on a daily basis. These mats help protect my carpet as well and make clean up a snap. Not to mention these mats looks great as well. There are only 2 down sides... One, they only come in 3 colors (Beige , Light Grey and Black). And Two, they cost $99 per set (pair)

Front

100_1818.jpg
100_1817.jpg
100_1821.jpg

Rear

100_1822.jpg
100_1823.jpg
100_1824.jpg


Anyway, I finally got my car back and my build kicked up again. Im going for more of a SQL build this time around. The setup is one DC XL m2 10" on a DC 2.0k (1 ohm final load) It has an 8 speaker bose factory system ,u-connect and sirrus radio. That being said, I didn't want to mess with the factory speakers just yet. Add a RF BLD (3Sixty.2) to beable to add the sub stage for now. Anyway, this is what I came up with;

Chrysler-box.gif

The reason for the baffle being that way is so that it can be flush mounted to the mini-wall. Which will seal it all off from the trunk area. Here are the specs: (inches)

Volume
12" H * 10" W * 29.5" D = 1.44618³ ft

Port
10.5" H * 2" W = 21in² with a port length of 33.625" (which is about 33hz)

Sub will only get rated power @ 1 ohm off the DC 2.0k so with the Volume of 1.44618³ ft - .13402³ ft of 45s and port displacement - .18³ ft of sub displacement. The sub should be seeing 1.13216³ ft after displacement.

Sorry that I didn't take any pics of actual "building" but I got in the zone and didn't stop. Plus my camera was with my relatives that when on vacation :( BUT it turned out better than I expected.
Upgraded all the stock wires with Knu Flex 1/0. I need to upgrade the stock battery eventually.

100_1744.jpg

100_1567.jpg

Added a run of Knu Flex 1/0 from the alt to the battery.

100_1565.jpg

100_1563.jpg

I found a stock grommet that allowed me access to the engine bay.

100_1566.jpg

100_1569.jpg


Haha finally got my DC XL m2 10" with all the fixin's in. Rusty even signed it for me. I can't wait to slap it in!!. Took these pics whith my cell phone while at work. I'll take better ones when I post my build log :)

photo2-1.jpg

photo1.jpg

photo4.jpg

photo2.jpg

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

So I got my DC 2.0k in finally. It looks sick!

100_1724.gif
100_1725.gif
100_1726.gif

I added a plexi glass back to the DC 2.0K.

100_1727.gif
100_1728.gif
100_1729.gif
100_1730.gif

I then added holes for air flow.

100_1733.jpg
100_1730-1.jpg
100_1731.jpg
100_1734.jpg

Then I added 2 PC fans to the plexi-glass back for even more airflow.

photo1_zps445d3e63.jpg
photo2_zps1da42013.jpg
photo3_zps45a236d5.jpg

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

I was going to go this route with the trunk but I eneded up not liking the over all look. Plus Noobtastic inspired me with his plexi-glass back in his build :)

photo4-2.jpg

photo5.jpg

I also scratched the red port idea.

photo2-4.jpg

photo1-4.jpg

This ended up being a much better route. It gave the trunk some much needed sex appeal.

100_1735223.jpg

100_1736.jpg

Added a plexiglass back, drilled holes and added 2 70 mm fans for better airflow.

100_1739.jpg

The left fuse goes from the XS D3100 to the DC 2.0k. The right fuse goes from the XS D3100 to stock battery. (I even left room for dual inputs in the future)

100_1743.jpg

With the way I mounted the XS D3100 I can still gain access to the stock battery with ease.

100_1746.jpg


And now the box which is sealed off from the trunk. I hate rattling trunks. (the flash makes the carpet's color more dramatic than it really is)

100_1749.jpg

100_1757.jpg

100_1750.jpg

100_1751.jpg

Here are some pics without flash in the sun light.

100_1774.jpg

100_1775.jpg

Oh yeah and here is what it looks like behind the trunk wall. there is another wall right behind it with 2 x 4's spacing it apart. the amp fits right in between them 2 x 4's. I recycled a 1/4" "pecans for sale" sign to make my trunk wall.. its good wood so sue me haha.....

100_1783.jpg

100_1784.jpg

100_1780.jpg

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.


I added factory trunk carpet to the trunk lid. Makes it 100 times better in my opinion.

100_1826.jpg
100_1828.jpg

Here is a quick Video, in the begining it also shows how the amp fans work. They turn off and onn with the turn of a key.

][/center]

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

Little bit of an update. added a few more mods. ( SRT8 Front Fascia, SRT8 Style Trunk Lip, Show-n-Go License Plate Bracket, Red Fender Stripes and Painted the Calipers to match. )

100_1840.jpg

100_1841.jpg

100_1842.jpg

100_1843.jpg

100_1844.jpg

100_1845.jpg

100_1856.jpg

100_1859.jpg

100_1857.jpg

100_1858.jpg

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

Well, Here is a bit of an update. ( Sorry for the lousy iphone pics. Ill get better one when the camera is charged. )

I ditched the DC 2.0k and replaced it with a DC 3.5k with dual inputs. Re-did the trunk wall and added Plexiglas backing to the DC 3.5k. I also added cooling fans to the wall. Mainly because I couldn't fit any fans on the DC 3.5k itself. Took out my Factory 750cca battery and but my XS D3100 in its place. As well as adding five Exide deep cycle batteries (same tech as optima just different patents)

How the trunk usally looks with my tool kit in it

100_1911.jpg

without tool kit

100_1912.jpg

amp guts shots

100_1914.jpg
100_1915.jpg

Fuse holders for the positive dual inputs leads ( close to amp )

100_1913.jpg

negative and positive dual inputs (leading to the battery bank below)

100_1916.jpg

cooling fans

100_1917.jpg

I didn't pull any punches this time around electrical wise. haha....... As you can see I added five Exide spiral tech deep cycle batteries (same tech as optima, just different patents). Each negative and positive has two 1/0 leads going to and from each post. I beat the spare tire area flat and Great Stuff foamed them into place. That black thing in between the bottom to batteries is a piece of leather. The negative and positive there are kinda close so I just put it there "just in case".

100_1918.jpg

The black wire on the Positive side of the XS D3100 is the 1/0 Knukonceptz running to the alternator. The light red one next to that is the factory 1/0 that also runs to the front of the car and splits off before the alternator. ( Don't worry about that black tape lol.. its just temporary.. The D3100 sits a little high its just for safety. I'm working on something more permanent.)

100_1919.jpg

The battery bank starts at the top right hand Exide battery (positive and negative are rand from that battery to the D3100) and ends at the bottom right battery which is also where the amp dual inputs are as well. ( I didn't fuse any of the batteries due to them being so close.. That should be fine yeah? Or should I at least fuse near the D3100 and the Exide?) There are two fuses on the alternator lol... Don't worry.


100_1920.jpg


I also replaced my Stock alternator with a MechMan 240a alternator. According to the testing paper it does "142a at low rpm speeds and 252a at high rpm speeds." I could defiantly tell the difference as soon as I started the vehicle. The alternator on my 300 is on the bottom.. No worries, I have a car lift at work at my disposal muhahahahaha.

photo5.jpg
photo4.jpg
photo3.jpg
photo2.jpg
photo1.jpg

Also when I was re-doing the system I locked myself out of my trunk.... So I had to kick the front side of the box to get into the trunk and pop the trunk lid. Which in turn broke and I had to redo the front side of the box and the mini-wall. I'll get pictures of it later today. It needs to be re-sealed but I ran out of great stuff. Ill re-do that this weekend. Either way the single DC 10" m2 XL defiantly gets down. Quite a bit difference in loudness as well.

100_1907.jpg
100_1909.jpg
100_1910.jpg
100_1908.jpg

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.



OK peeps here is a W.I.P. Update!! ( I'll Update as I go. )



We'll I got my hood in and been working on it. Got the custom eyelids moulded onto the hood. Did a little reshaping and test fitting last night. Seems to be coming along smoothly.



During the first test fit their was quite a bit off. So I had to sand down a bit on the eyelids.



photo3-1.jpg


photo4-1.jpg


photo5-1.jpg



Then I popped it on the hood to do a tad bit of test fitting. every thing line up pretty nicely after that.



photo1-2.jpg


photo2-2.jpg



Then I slapped some more kitty hair on the back of the eyelids to add strength. Now to let that dry and sand it later today.



photo7.jpg


photo8.jpg


photo9.jpg




This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.



Im one of them type of people that over think things a lot.. lol. I have to have it perfect and I have to know how what it will look like haha.



Thay being said I got a small update tonight. Did some more work on the eyelids.



photo1-10.jpg



I got on the sander a bit too much on the passanger side. Thats' ok. fiberglass and resine to the rescue!!



photo4-6.jpg



Looks ugly at the moment but don't you worry it will come around :)



photo5-2.jpg



NOW for the Driver's side. Damn near perfect if I do say so myself.



photo2-9.jpg



photo3-6.jpg




This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.



Did some more sanding, trimming and smoothing out over the weekend. I think I got it pretty smooth haha. only issuse I noticed was the corner near the eye on the left needs smoothed out.



photo1-5.jpg



photo2-5.jpg



photo3-4.jpg



photo4-4.jpg



OK so yesterday after a little more smoothing things out... I cleaned the bottom side off and Degreased/DEwaxed it. Then ran a terry cloth over it to prep for paint!



photo1-4.jpg



PAINT!! OH Snap... its on. Painted just the bottom side. Will do the top side today after work.



photo2-4.jpg



And while I was at it I also painted some of my under the hood bling... haha...



photo3-3.jpg



strut mount covers



photo4-3.jpg



Modded Infinity G35 engine cover... its gunna look sick with its 100% done. It had an oil fill hole that didn't line up to my 3.5L but I took care of that by filling it in. I also filled in the Infinity emblem. Im still debating over paint the "v6 3.5" torch red or gloss black. Also Im debating over painting the raised section of the cover black. Keep in mind, the hash marks will be torch red. What are your guys thoughts??



photo6-2.jpg



sexy all coolant tank!!



photo7-2.jpg


photo8-2.jpg




This is my UBL for my 08 Chrysler 300. Any comments or questions please post them HERE.

* Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface
* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )
* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )
* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )
* Rockford Fosgate Balanced Line Driver

* One FULLY LOADED ~ 10" DC m2 XL
* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement
* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling
* MechMan 240a High Output Alternator

* KnuKonceptz Krystal Kable RCA Cables
* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable
* Five Exide Orbital ORB34M Marine 12 Volt Batteries
* PowerMaster XS D3100 12 Volt Battery

My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL

My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   2 Members, 0 Anonymous, 85 Guests (See full list)




×
×
  • Create New...