SojiaRaggs9000 Posted July 30, 2012 Report Share Posted July 30, 2012 NEWEST UPDATES ON POST #142... Enjoy!!! If you'd like to scroll tho some picture without all the comments you can check out my Uninterrupted Build Log HERE Sorry if some of the comments are a bit out of wack but I eddited my posts to show the progress over time. As well as added a bunch more pictured i found. First off thank you for taking a look at my thread, hope you like what you see. OK so I have a 2008 Chrysler 300 Limited which I bought back in December. Here are a few pics of it at the dealershipIt has a really nice tan leather interior with a light wood grain.Then came the mods. tasteful, not over the top. Its not 100% done yet but Im going for a beefy / sporty look. All I lack is a SRT 8 front lip, trunk lip and AAC Halos. MAYBE some stripes. The mods consist of: Grip Grille with a custom modded 2010 Chrysler 300 "s" Wing Emblem (silver Chrysler ribbons rather than the OEM gold ones, 20" Chrome Challenger rims, Chrome Handles, Chrome Mirrors, Darker window tint. Custom mandrel bent dual exhaust consisting of 1 FlowMaster Super 40 and 2 4" chrome resonated tips. And for the people looking for just vids I added them to this post and #14 for your convenience Here is a quick Video, in the begining it also shows how the amp fans work. They turn off and onn with the turn of a key. ][/center] * Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )* Rockford Fosgate Balanced Line Driver * One FULLY LOADED ~ 10" DC m2 XL* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling* MechMan 240a High Output Alternator * KnuKonceptz Krystal Kable RCA Cables* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable* Five Exide Orbital ORB34M Marine 12 Volt Batteries* PowerMaster XS D3100 12 Volt Battery My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold Link to comment Share on other sites More sharing options...
WastedTalent Posted July 30, 2012 Report Share Posted July 30, 2012 Damn, that looks super clean. Love the "built in" look. Good job Sheena = pedobear Link to comment Share on other sites More sharing options...
CortezDTV Posted July 30, 2012 Report Share Posted July 30, 2012 Very nice man! Very clean! SCSB Santa Cruz Speaker Box Build logs: Daily Driver Lemon Marquis 2 american bass 750.1s 350.4 on 14 focal 6.5s sq 945 on 4 hertz tweeters Mystery subs http://www.stevemead...__fromsearch__1 The Mustang 'dubbed' Shirley the project from bullet holes to badass http://www.stevemead...cond-skin-time/ Link to comment Share on other sites More sharing options...
CJ18 Posted July 30, 2012 Report Share Posted July 30, 2012 I love the plexi on the bottom of the amp and the addition of the fans. Link to comment Share on other sites More sharing options...
SojiaRaggs9000 Posted July 30, 2012 Author Report Share Posted July 30, 2012 A few minor mods where added. WeatherTech FloorLiner floor mats. These things are great. I live in west Texas... dust, dirt rocks and all kinds of wild shit get tracked into my car on a daily basis. These mats help protect my carpet as well and make clean up a snap. Not to mention these mats looks great as well. There are only 2 down sides... One, they only come in 3 colors (Beige , Light Grey and Black). And Two, they cost $99 per set (pair) Front Rear Anyway, I finally got my car back and my build kicked up again. Im going for more of a SQL build this time around. The setup is one DC XL m2 10" on a DC 2.0k (1 ohm final load) It has an 8 speaker bose factory system ,u-connect and sirrus radio. That being said, I didn't want to mess with the factory speakers just yet. Add a RF BLD (3Sixty.2) to beable to add the sub stage for now. Anyway, this is what I came up with; The reason for the baffle being that way is so that it can be flush mounted to the mini-wall. Which will seal it all off from the trunk area. Here are the specs: (inches) Volume 12" H * 10" W * 29.5" D = 1.44618³ ft Port 10.5" H * 2" W = 21in² with a port length of 33.625" (which is about 33hz) Sub will only get rated power @ 1 ohm off the DC 2.0k so with the Volume of 1.44618³ ft - .13402³ ft of 45s and port displacement - .18³ ft of sub displacement. The sub should be seeing 1.13216³ ft after displacement. Sorry that I didn't take any pics of actual "building" but I got in the zone and didn't stop. Plus my camera was with my relatives that when on vacation BUT it turned out better than I expected. Upgraded all the stock wires with Knu Flex 1/0. I need to upgrade the stock battery eventually. Added a run of Knu Flex 1/0 from the alt to the battery. I found a stock grommet that allowed me access to the engine bay. Haha finally got my DC XL m2 10" with all the fixin's in. Rusty even signed it for me. I can't wait to slap it in!!. Took these pics whith my cell phone while at work. I'll take better ones when I post my build log Damn, that looks super clean. Love the "built in" look. Good job Very nice man! Very clean! Thanks fellas. My back is killing be right now from my all day install out in my drive way in 110 west Texas heat!! I swear to god I drank 2 gallons of sweet tea lol. I love the plexi on the bottom of the amp and the addition of the fans. Haha thanks CJ. Out here it gets hot as hell. With the amp mounted behind a wall i wanted to keep it cool while also showing them guts MORE PICS IN POST #1, #7, #13 AND #14. Videos in Post #1 and # 14 * Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )* Rockford Fosgate Balanced Line Driver * One FULLY LOADED ~ 10" DC m2 XL* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling* MechMan 240a High Output Alternator * KnuKonceptz Krystal Kable RCA Cables* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable* Five Exide Orbital ORB34M Marine 12 Volt Batteries* PowerMaster XS D3100 12 Volt Battery My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold Link to comment Share on other sites More sharing options...
sundown-e21 Posted July 30, 2012 Report Share Posted July 30, 2012 damn. that looks sick! i love the guts on that amp shown. what camera is that? it has really clear photos. also, do you have an exhaust on your car? it sounds fantastic! 1983 Bmw 320i 5 speed 251000 miles on it Sundown SA-12d2 Big 3 Optima 75-25 Jensen hlx600 150x4 amp Hifonics BRZ-1200.1D for sub in a 1.7ft^3 ~33hz ported box Pioneer USB stereo Bass knob integrated into old fading switch (Sneaky) Lowered on H&R sport springs with bilstein sport shocks (2" drop and handles like a dream) Leave him be. He's just talking shit and laying on his bathroom floor listening to Dashboard Confessional. Let nature take it's course and pump this chick in the butt. Let her know who's boss. Link to comment Share on other sites More sharing options...
SojiaRaggs9000 Posted July 30, 2012 Author Report Share Posted July 30, 2012 damn. that looks sick! i love the guts on that amp shown. what camera is that? it has really clear photos. also, do you have an exhaust on your car? it sounds fantastic! Camera is an older 10 mega pixel Kodak v1073. It can take photos up to resolutions of 3648 x 2736. The exhaust is a single Flowmaster Super 40 with custom mandrel bent pipes that gradually go from 2.25" up to 2.5". Then since I cut off the stock resonator, I added two 4" resonated tips. So I got my DC 2.0k in finanny. It looks sick! I added a plexi glass back to the DC 2.0K. I then added holes for air flow. Then I added 2 PC fans to the plexi-glass back for even more airflow. MORE PICS IN POST #1, #5, #13 AND #14. Videos in Post #1 and # 14 * Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )* Rockford Fosgate Balanced Line Driver * One FULLY LOADED ~ 10" DC m2 XL* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling* MechMan 240a High Output Alternator * KnuKonceptz Krystal Kable RCA Cables* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable* Five Exide Orbital ORB34M Marine 12 Volt Batteries* PowerMaster XS D3100 12 Volt Battery My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold Link to comment Share on other sites More sharing options...
OrionStang Posted July 30, 2012 Report Share Posted July 30, 2012 Came out really nice, man. Like it came from the factory. The fact you took your time on it definitely shows. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
SojiaRaggs9000 Posted July 30, 2012 Author Report Share Posted July 30, 2012 Came out really nice, man. Like it came from the factory. The fact you took your time on it definitely shows. Thanks man. I wish I would of took some pics of the box as I made it but my camera was in Hawaii without me I going make some videos of it playing some better songs because it has some pretty decent flex to it. I also need to make a video using the DD-1 and CC-1. when I do that Ill take some pictures of how it looks behind that wall in the trunk. (nice and neat with zip ties) * Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )* Rockford Fosgate Balanced Line Driver * One FULLY LOADED ~ 10" DC m2 XL* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling* MechMan 240a High Output Alternator * KnuKonceptz Krystal Kable RCA Cables* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable* Five Exide Orbital ORB34M Marine 12 Volt Batteries* PowerMaster XS D3100 12 Volt Battery My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold Link to comment Share on other sites More sharing options...
IBleedMusick Posted July 30, 2012 Report Share Posted July 30, 2012 DAMMMMNNNN That is clean as hell loving the look. 2013 Dodge Charger Build Log 1996 Ford Explorer XLT 5.0Build Log 2005 Honda Civic LX Coupe Build Log SMD SUPER SELLER!!!!My Selling Feedback Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.