byron2817 Posted February 17, 2008 Report Share Posted February 17, 2008 i try to fiberglass my pillar to add 2"tweets and i messed it up bad.everypart has bumps looks really nasty what can i do.nothing looks even.i put alot of putty but still looks nasty after i sand it NEED TO GET LOUDER!!! Link to comment Share on other sites More sharing options...
mrwigglezdj Posted February 17, 2008 Report Share Posted February 17, 2008 (edited) get some 60 grit and a grinding wheel and grind that shit out of it, a little elbow grease and some bondo cover up and you should be just fine and if you could , can you post some decent pictures of what youre talking about ? Edited February 17, 2008 by mrwigglezdj Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
kbreudi Posted February 17, 2008 Report Share Posted February 17, 2008 i try to fiberglass my pillar to add 2"tweets and i messed it up bad.everypart has bumps looks really nasty what can i do.nothing looks even.i put alot of putty but still looks nasty after i sand it Hey bro post some pics and maybe we can help ya out.....if theres one person who can its the almighty TIMMYYY TEAM SUNDOWN 4 Nightshade 15"s 2 Sundown SAZ-4500 8 Deep Cycle batts 1998 Cadillac Catera SPLMAX CUP 2008 Fourth Place Overall Link to comment Share on other sites More sharing options...
byron2817 Posted February 17, 2008 Author Report Share Posted February 17, 2008 i'll post pic right now NEED TO GET LOUDER!!! Link to comment Share on other sites More sharing options...
stratusrt01 Posted February 17, 2008 Report Share Posted February 17, 2008 sounds like you didn't add body filler over the glass after you were done, to get them smooth, it's a necessity Link to comment Share on other sites More sharing options...
byron2817 Posted February 17, 2008 Author Report Share Posted February 17, 2008 here they are NEED TO GET LOUDER!!! Link to comment Share on other sites More sharing options...
byron2817 Posted February 17, 2008 Author Report Share Posted February 17, 2008 sounds like you didn't add body filler over the glass after you were done, to get them smooth, it's a necessity DAM that really nice.wish i could do it like that NEED TO GET LOUDER!!! Link to comment Share on other sites More sharing options...
stratusrt01 Posted February 17, 2008 Report Share Posted February 17, 2008 sand, sand and more sand. Looks like you put the filler on too thick to start, and let it harden too much while applying. Sand all that down smooth, and apply light coats, sanding in between coats. Link to comment Share on other sites More sharing options...
stratusrt01 Posted February 18, 2008 Report Share Posted February 18, 2008 DAM that really nice.wish i could do it like that Thanks, but there's probably 8 hours of sanding on each of those a pillars to get them perfect. Just take your time, and sand a lot more. Link to comment Share on other sites More sharing options...
byron2817 Posted February 18, 2008 Author Report Share Posted February 18, 2008 i'll post better quality pics when i get battery's for my camera.they look really bad in person NEED TO GET LOUDER!!! Link to comment Share on other sites More sharing options...
Recommended Posts