dallasjd Posted June 6, 2013 Author Report Share Posted June 6, 2013 yea its a dual 4 ohm wired to 2 ohms amps were strapped at 2 ohms tuned to put out around 2200 rms but back to the topic can somebody please help me with a box design? Link to comment Share on other sites More sharing options...
Joe X Posted June 6, 2013 Report Share Posted June 6, 2013 Here is a suggestion BUT make sure to read the notes below the sketch: Enclosure Specifications:Fb = 36 HzVb = 6 ft^3External Height = 19 inExternal Width = 37 inExternal Depth = 25 inPort Width = 6 3/8 inCut Sheet List:* All Dimensions in Inches.* Wood Thickness is 3/4 for all Parts.External Enclosure Parts:2 x Top & Bottom (3 parts) = 37 x 25Left & Right Sides =Side 1 = 23 1/2 x 16 3/4Side 2 = 24 1/4 x 16 3/4Front = 29 7/8 x 16 3/4Back = 37 x 16 3/4L Port Internal Assembly Parts:Front to Back = 17 1/8 x 16 3/4 Assembly guide (generic dimensions): Important notes:- All boxes built outside the vehicle need to fit in their way in not just have the right dimensions.- This box should be operated around subwoofer(s) rated power. If that´s not the case, let me know.- The port needs 6 3/8" of free airspace in front of it for proper operation.- Setting your amp subsonic filter to 28Hz is suggested. Link to comment Share on other sites More sharing options...
Dd9515 king Posted June 7, 2013 Report Share Posted June 7, 2013 Dallas u dont just build a box and put whatever power to it. The box has to be built for the power tuning and responce you want. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.