MegaMan93 Posted June 18, 2013 Author Report Share Posted June 18, 2013 I think it's the speaker terminals on the amp. How do I check those?! We don't have alot of neighbors so we can blast the stereo. Link to comment Share on other sites More sharing options...
MegaMan93 Posted June 18, 2013 Author Report Share Posted June 18, 2013 Ok thanks SnowDrifter! We don't have alot of neighbors so we can blast the stereo. Link to comment Share on other sites More sharing options...
MegaMan93 Posted June 18, 2013 Author Report Share Posted June 18, 2013 What should it read ? We don't have alot of neighbors so we can blast the stereo. Link to comment Share on other sites More sharing options...
SnowDrifter Posted June 18, 2013 Report Share Posted June 18, 2013 What is it reading?BTW playing a test tone is better than music. You can find some 40hz ones in my sig under "DD-1 Tracks Here" ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
MegaMan93 Posted June 18, 2013 Author Report Share Posted June 18, 2013 .0 on the meter! So it's dead? We don't have alot of neighbors so we can blast the stereo. Link to comment Share on other sites More sharing options...
MegaMan93 Posted June 18, 2013 Author Report Share Posted June 18, 2013 Actually a full tilt .1-.2 back and forth We don't have alot of neighbors so we can blast the stereo. Link to comment Share on other sites More sharing options...
98GCLimited Posted June 18, 2013 Report Share Posted June 18, 2013 Sounds like amp isnt putting out any power bro. Did you make sure your head unit subwoofer output is turned on? And also use the multimeter on your rcas going to the sub amp and see if you are getting voltage there if your not then your getting no signal to the amp, if you are getting voltage through the rcas and not out of the amp speaker outputs then the amp is not putting out power and is most likely faulty amp. Link to comment Share on other sites More sharing options...
jarrius Posted June 18, 2013 Report Share Posted June 18, 2013 I know this is a no brainier but if you have a remote gain or something controlling the amp check that. 2012 Chevy sonic1xSQ HDC3 12 D2RF R1200d 140 square foot of Q-Mat(soon to be installed) 140.2Db sealed on the dash with TL 142 DB sealed on the dash with another meter (was dead on with the TL at a show i was at) 141 on music. strangeduck,on 02 Jan 2014 - 01:39 AM, said: when my car spins out i just put the car in neutral, turn in the direction i want to go and pucker my asshole Link to comment Share on other sites More sharing options...
SnowDrifter Posted June 18, 2013 Report Share Posted June 18, 2013 Now do the same thing for the RCAs. Positive probe to the center pin, negative probe to the sheath. Post back what it reads ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.