Grtrat1 Posted November 16, 2006 Report Share Posted November 16, 2006 Since I didnt really get too much help on my other threads, I got some help from Stratus and Viper. I went into BBP6 got my correct measurements and ports. It came out to right around 6cubes. But since I cant put the box in my trunk being 29 inches deep, I have to build it in 2 peices. The box will be 34" wide instead of 36" Heres the link. http://forum.realmofexcursion.com/showthre...ead.php?t=17945 any advice? Link to comment Share on other sites More sharing options...
AI James Posted November 16, 2006 Report Share Posted November 16, 2006 my suggestion is building it in the trunk rather then try to have a rigid 2 piece box Link to comment Share on other sites More sharing options...
Grtrat1 Posted November 16, 2006 Author Report Share Posted November 16, 2006 Mind giving some helpful hints on how to build it in the trunk? Link to comment Share on other sites More sharing options...
AI James Posted November 16, 2006 Report Share Posted November 16, 2006 start with the bottom piece and build up from there, i'll post pics of my solo baric box i built in the trunk Link to comment Share on other sites More sharing options...
AI James Posted November 16, 2006 Report Share Posted November 16, 2006 All that i used was a square, air brad nailer and gorilla glue..didnt come out bad at all, sadly i had to smash it into a million pieces to get it out of the trunk. was 6.5 cubes 32 hz. Link to comment Share on other sites More sharing options...
Grtrat1 Posted November 16, 2006 Author Report Share Posted November 16, 2006 wow, how did you get it to seal good? I dont have a air compressor or nail gun. Link to comment Share on other sites More sharing options...
Grtrat1 Posted November 16, 2006 Author Report Share Posted November 16, 2006 my trunk doesnt have that easy reach section. My trunk lid is straight across Old school. -__/ <yours mine> ------- Link to comment Share on other sites More sharing options...
AI James Posted November 16, 2006 Report Share Posted November 16, 2006 invest in one. i still used caulking in all my joints except the top piece. i thought it was going to be harder then it actually was. I've done about 10 different in the trunk installs about the same way, i just don't have pics of those ones. And loading that box was a bitch, the subs didn't have enough clearance to get into the mounting positions, so i had to lift the box in the car while my gf popped them in the whole...i still remember how much she bitched about simply being asked to put a speaker in a hole. Link to comment Share on other sites More sharing options...
Grtrat1 Posted November 16, 2006 Author Report Share Posted November 16, 2006 lol I hear ya. The way mine will be, I wont be able to lift it at all. I have a bendable bit I can attatch to my drill to put the subs in. Yes its a tight fit. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.