Greasemonkey2014 Posted December 4, 2013 Author Report Share Posted December 4, 2013 Yo you put screws in the box or just glue it? Link to comment Share on other sites More sharing options...
Joe X Posted December 4, 2013 Report Share Posted December 4, 2013 MDF/Drywall screws around 1 5/8" predrill using appropriate drill bit , screws spaced about 5" or so. Slanted boxes are hard to do without some woodworking tools (clamps, table saw, etc.) so if you don't have that get some help, clean exact cuts are most important or you will have leaks that you will need to fix. Know what you are doing before beginning or it can turn itself into a mess rather easily. Link to comment Share on other sites More sharing options...
Greasemonkey2014 Posted December 4, 2013 Author Report Share Posted December 4, 2013 i only have like 4 clamps long enough but i can work on it at the wood shop at school Link to comment Share on other sites More sharing options...
Greasemonkey2014 Posted December 4, 2013 Author Report Share Posted December 4, 2013 Is it possible to have the 2 subs too close together? Would the magnets mess with each other? Link to comment Share on other sites More sharing options...
Greasemonkey2014 Posted December 8, 2013 Author Report Share Posted December 8, 2013 Before i go ahead does this look right? Link to comment Share on other sites More sharing options...
CleanSierra Posted December 8, 2013 Report Share Posted December 8, 2013 How much clearance do you have between that port opening and your B-pillar? You need at least 4.25" of clearance to avoid choking the port, at least that is preferred. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
Greasemonkey2014 Posted December 8, 2013 Author Report Share Posted December 8, 2013 about 6" Link to comment Share on other sites More sharing options...
CleanSierra Posted December 8, 2013 Report Share Posted December 8, 2013 Perfect. I run a similar configuration, but opposite. I fire my ports at the passenger B-pillar. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
CleanSierra Posted December 8, 2013 Report Share Posted December 8, 2013 Those ports roughly displace around .20 each I believe and two subs will eat into net volume further. So even at .1 per sub, that's .20. .60 cubes of displacement brings your net volume to around 1.5 cubes. So .75 ported per sub. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
Greasemonkey2014 Posted December 8, 2013 Author Report Share Posted December 8, 2013 The sub recomends 1 is this ok? should i add poly-fil? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.