egnolac26 Posted December 9, 2013 Report Share Posted December 9, 2013 First build log recorded. Vehicle: 2005 Lexus LS430 Mods: LED mirror light, reverse lights, and all interior lights, JDM sun visor, 35% tint all around I plan on finishing this car fully done by mid January. Will be painting car this week and hopefully finish my car audio stuff with it. 12/9 - 12/15 Plan: Paint car Candy Rootbeer, install BC coilovers, paint 20"rims same color as car, install car audio stuff while car is in the process of being painted Car audio equipment: Double dinn kit - http://www.beatsonicusa.com/beat-sonic-mva-24l.html Head Unit - Pioneer AVH- X8500BHS Speakers - 2 sets of Crescendo Messo's 6.5 Amp for subs - DC Audio 3.5K soon to be 2 one to each speaker Amp for mids & highs - DC Audio 175.4 Subs - 2 Level 5 12's Toolmaker ring terminals Sky High 0,4, and 14 gauge OFC wires RCA wires - KnuKonceptz SMD volt meter Second skin Need to order: Mechman 320A alt XS battery front D2400 2 XS batteries rear D3100 Will be doing the Big 3 once I get my Alt and batteries. Link to comment Share on other sites More sharing options...
egnolac26 Posted December 9, 2013 Author Report Share Posted December 9, 2013 Pic of car stock Link to comment Share on other sites More sharing options...
mgameforever01 Posted December 9, 2013 Report Share Posted December 9, 2013 Good plan tuned in for sure. Link to comment Share on other sites More sharing options...
egnolac26 Posted December 9, 2013 Author Report Share Posted December 9, 2013 0 Gauge Power and Ground Speakers Link to comment Share on other sites More sharing options...
egnolac26 Posted December 9, 2013 Author Report Share Posted December 9, 2013 Before and after picture of the double dinn head unit Stock After with the SMD volt meter Link to comment Share on other sites More sharing options...
egnolac26 Posted December 9, 2013 Author Report Share Posted December 9, 2013 Speaker wire Had to drill some holes on the left side to run RCA, and remote wires Will post pictures of the right side which has 2 runs of 0 and 4 gauge. Now I have to figure out how I am going to get the wires through the firewall. I was planning on getting the DC 5K (2 of of em) but I can not fit 4 plus runs of 0 gauge wire Link to comment Share on other sites More sharing options...
egnolac26 Posted December 9, 2013 Author Report Share Posted December 9, 2013 I installed 1 of the Mezzo's to my door pod and I noticed a bubble. Do you think this will effect the performance of the speakers? So it is the door pod- Second skin tweeter kit around the opening - then I screwed down the speaker. Link to comment Share on other sites More sharing options...
egnolac26 Posted December 10, 2013 Author Report Share Posted December 10, 2013 Here is a picture of th SMD finished flushed on the face plate Link to comment Share on other sites More sharing options...
Wicks Posted December 10, 2013 Report Share Posted December 10, 2013 Tuned in. Interested to see what you do with those Level5's? This post sent with 100% recycled electrons. 2004 BMW M3Mechman 280A 2 - XS Power XP30001 - XS Power D375 500F of Maxwell SuperCaps (soon to be 1000F) iPadMini2Dash mounted O-scopeAudison bitOne (Remote DRC MP) Highs Amp - PPI Art A404 Hertz HSK130 (HSK165 waiting...) DC Audio DC9.0K 2- DC Audio XL12m2LEGAL - 147.3dB @ 41Hz OUTLAW - 150.2dB @ 45Hz OUTLAW - 145.7dB @ 30Hz JUNE 2014 SOTM WINNER 2014 COLORADO PEOPLE'S CHOICE WINNER SOTM BUILD:http://www.stevemeadedesigns.com/board/topic/141656-wicks-e46-m3-build-bass-turbo-button-and-a-big-new-addition/page-68#entry2802026 Link to comment Share on other sites More sharing options...
egnolac26 Posted December 10, 2013 Author Report Share Posted December 10, 2013 Toolmaker battery terminal waiting for 1 more pair Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.