imistm2 Posted January 2, 2014 Author Report Posted January 2, 2014 The only thing is i never built a center console enclosure yet a ported one im not so good at building ported enclosures. I would need help.
ToNasty Posted January 2, 2014 Report Posted January 2, 2014 Center console would be easier. An if you want even easier then use an aero port ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers
imistm2 Posted January 2, 2014 Author Report Posted January 2, 2014 My length max would be roughly 27" and my max width about 9" and well the height i would need to figure as i build
FUKAZ28 Posted January 2, 2014 Report Posted January 2, 2014 There's a lot of very talented people on this board. Measurements are the most important thing, post up maximum dimensions you can work with and I'm sure someone will get you something figured out. I recently downloaded google setchup and it's pretty cool. You can get a visual idea of the enclosure. And it's free. Looking forward to seeing what you decide.
imistm2 Posted January 2, 2014 Author Report Posted January 2, 2014 Yeah i would like something behind the seat but it seems very difficult. The center console is gonna bring alot of attention not to mention i had gotten car jacked at gunpoint and they stole my old setup. I had shallow p3s 12" and rf punch 550.2 and a rf punch 450.4 and caps they stole pretty much everything.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.