Aaron Mcgrath Posted February 3, 2014 Report Posted February 3, 2014 hey guys im pretty new to mobile audio still and i have a question it may be a stupid question idk lol but the question is if i had for instance 2 500 watt peek subs wired together say into 2 ohms would having them together give them a 1000 watt peak power handling?
P4killer_ Posted February 3, 2014 Report Posted February 3, 2014 Quick answer is yes. But peak means absolutely nothing disregard any peak value. You want rms values. Or at very least peak/2. Rms power handling or output if it were an amp etc etc. Setup: 2010 Hyundai Elantra Factory Unit via 4 chan NVX LOC Excessive Amperage "H/O" Alt Xs D3400/ Xs XP3000 Big 3. 2 Runs of +, 2 Runs of - DD M3b and 2 12" AQ HDC4s
P4killer_ Posted February 3, 2014 Report Posted February 3, 2014 1000w total still 500 each. in your example. Obviously Setup: 2010 Hyundai Elantra Factory Unit via 4 chan NVX LOC Excessive Amperage "H/O" Alt Xs D3400/ Xs XP3000 Big 3. 2 Runs of +, 2 Runs of - DD M3b and 2 12" AQ HDC4s
Aaron Mcgrath Posted February 3, 2014 Author Report Posted February 3, 2014 ok so as p4 is saying.. disregard peak value.. we will make it 500 watts rms per sub if i had 2 500 rms subwoofers wired together at 2 ohms and an amp that pushed 1000 watts rms into 2 ohms they would run in there rms range?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.