shadowcaster Posted February 12, 2014 Report Share Posted February 12, 2014 Greetings again guys so i decided to back to 2 12's again,SA-D4 if all goes right.Im going to be sealed off firing forward(already started)center port. let me add that the amp is an MB Quart ONX 1.1600D so about 800rms to each which is why i went a bit smaller on size.Im unsure tho on the proper length of the extension for 26in total with 15.5in from front to 1.75in away from the back wall.i have 10.5in ext.from the left and right sides..also not shown yet in planed bracing 3/4 dowels and fiberglassed. thanks for any corrections in advance guys! 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class Link to comment Share on other sites More sharing options...
ToNasty Posted February 12, 2014 Report Share Posted February 12, 2014 Bring up the net volume and bring down the port area a bit ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
shadowcaster Posted February 12, 2014 Author Report Share Posted February 12, 2014 ok lets see what i can do 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class Link to comment Share on other sites More sharing options...
shadowcaster Posted February 12, 2014 Author Report Share Posted February 12, 2014 what should i be closer to 40 or smaller? 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class Link to comment Share on other sites More sharing options...
ToNasty Posted February 12, 2014 Report Share Posted February 12, 2014 I'd do 3.5-3.6 cubes net. With about 13" of port per cube ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
shadowcaster Posted February 12, 2014 Author Report Share Posted February 12, 2014 thanks sir gonna see what i can do i have a bit more height and depth available 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class Link to comment Share on other sites More sharing options...
shadowcaster Posted February 12, 2014 Author Report Share Posted February 12, 2014 that 3.59net with 13.1 port per cube if thats a go can you also confirm that the length of the extension was measured correctly in my 1st pic the length has changed a bit 4in 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class Link to comment Share on other sites More sharing options...
shadowcaster Posted February 12, 2014 Author Report Share Posted February 12, 2014 ok thats the torres and skp..my question is is the 4.5in extension correct? 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class Link to comment Share on other sites More sharing options...
shadowcaster Posted February 12, 2014 Author Report Share Posted February 12, 2014 can anyone confirm the extensions? 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.