Slawsen Posted June 8, 2010 Report Share Posted June 8, 2010 Do you know anyone that makes these for reasonable prices? 00' Nissan Xterra Always under construction :] HU: Pioneer DEH3100-UB Mids & Highs: Kicker DS Component Set & Crescendo tweeters Mids & Highs Amp: Rockford 150.2 Subwoofer: 2 DC Audio LV 4 18"s Subwoofer Amp: Hifonics Brutus 2005d you been hanging out with jeff and dustin with that green paint? its yellow so it has to be loud. Link to comment Share on other sites More sharing options...
Airborne Posted June 8, 2010 Report Share Posted June 8, 2010 this is the plan and cut list. I don't remember who sent me this but it is a great design and absolutely bangs! For the double box: (This is looking at the lower drawing on the left) Top -27x18 Bottom -32.25x18 Port side -15.75x18 Side -15x18 Piece(1) -9.75x18 Piece(2) -21x18 Piece(3) -21.75x18 Front/Back -32.25x16.5 For the single box: (Looking at the lower right) Top -27x8.75 Bottom -32.25x8.75 Port side -15.75x8.75 Side -15x8.75 Piece(1) -9.75x8.75 Piece(2) -21x8.75 Piece(3) -21.75x8.75 Top/Bottom -32.25x16.5 The subs are 5.625 or 5/8" from the outside of the box. Link to comment Share on other sites More sharing options...
alaskanbass Posted June 11, 2010 Report Share Posted June 11, 2010 i want to do a tline, can anyone help me with a design? i want to use a type r 1043d, and a alpine pdx 1.600 Fs 31, Qms 87.9, Qts .53, sd cone area is 332 cm2 clarion cz500 head unit Kinetik hc600 2 level 3 15s in a 4th order mb quart 1500.1 (for now untill i get a dc 1.2k) all knu konceptz wiring in a 2009 ford flex -DISKOLORED AUDIO- -Authorized Dealer for DC Soundlab in Alaska- Link to comment Share on other sites More sharing options...
Forevrbumpn Posted June 11, 2010 Author Report Share Posted June 11, 2010 I might throw something out there for ya I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy. Link to comment Share on other sites More sharing options...
Forevrbumpn Posted June 11, 2010 Author Report Share Posted June 11, 2010 This should work out just fine I measured it to about 31.5 - 32hz I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy. Link to comment Share on other sites More sharing options...
alaskanbass Posted June 11, 2010 Report Share Posted June 11, 2010 thanks man, i just gotta squeeze it into a pt cruiser now lol clarion cz500 head unit Kinetik hc600 2 level 3 15s in a 4th order mb quart 1500.1 (for now untill i get a dc 1.2k) all knu konceptz wiring in a 2009 ford flex -DISKOLORED AUDIO- -Authorized Dealer for DC Soundlab in Alaska- Link to comment Share on other sites More sharing options...
Forevrbumpn Posted June 11, 2010 Author Report Share Posted June 11, 2010 what is your measurements needed? I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy. Link to comment Share on other sites More sharing options...
alaskanbass Posted June 11, 2010 Report Share Posted June 11, 2010 i just took measurements and if i cut the little shelf slots off it will fit, but it will have to face up clarion cz500 head unit Kinetik hc600 2 level 3 15s in a 4th order mb quart 1500.1 (for now untill i get a dc 1.2k) all knu konceptz wiring in a 2009 ford flex -DISKOLORED AUDIO- -Authorized Dealer for DC Soundlab in Alaska- Link to comment Share on other sites More sharing options...
DylanH Posted June 12, 2010 Report Share Posted June 12, 2010 Would I be able to do either a DC Lvl 4 XL 18 or Lvl 5 18 or BTL 18??? http://www.youtube.c...er/SmallTownSPL 2002 Chevy Blazer Substage: Shhh, its a secret Mids and Highs: Stock-Going to change soon Amp:MTX 92001 Wire:1/0 Welding cable Electrical:Stock http://www.stevemead...__fromsearch__1 I hope she was meaning that to you. Any who.... You dont say you wanna have dinner in the first damn post. talk to her first. I say find out if the status was torwards you.. Here try this... "Hey hows it going ( notice smiley face makes everything better ) I saw your status. "You are far from usual".... So is my dick... Wanna Fuck tommorow???" Or send her message saying "hey" she replies back "hey" when this happens reply Wanna fuck (INSERT ADDRESS HERE) Quote of the SPL Creed ; back in the day my girlfriend gave me a choice between her and my love for car audio, I told that bitch I've made harder decisions at the Coke machine. Link to comment Share on other sites More sharing options...
fordfan92 Posted June 12, 2010 Report Share Posted June 12, 2010 I read all of this and I'm still a lil confused but I get the basics. I'm wondering if I can build a t-line box for my 2 12" Alpine Type R's? Here's the specs of them. Nominal Impendance 4ohm+4ohm Frequency Response 23-500Hz Sensitivity (SPL@1W/1m) 85 dB D.C Coil Resistance (Re) 3.7ohm+3.7ohm Inductance (Le) 1kHz/20kHz 3.71mH/1.67mH Free Air Resonance (Fs) 29Hz Equivalent Stiffness (Vas) 45L (1.6 ft^3) Mechanical Q (Qms) 7.89 Electrical Q (Qes) .50 Total Q (Qts) .47 Linear Excursion [(Hvc-Hag)/2)], One-Way (Xmax) 18.2 mm Magnetic Linear Excursion, One-Way (Xmag) 19.4 mm Mechanical Excursion, Peak-to-Peak 65 mm Gap Height (Hag) 10 mm Coil Height (Hvc) 46.4 mm Cone Area (Sd) 480 cm^2 Voice Coil Diameter 50 mm (2") Magnet Weight 109 oz I'm going to put them in a ford f150 extended cab. Here's the measurements of the space I have to work with 41" height, 58" width, 25" depth. Oh and will this box be heart stopping loud and shake windows? Maybe do hairtricks? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.