TS2GFrank Posted February 28, 2014 Report Share Posted February 28, 2014 I'm building my first box this weekend for my gf Pontiac G6. She has 2 Sundown E-10s on a SQ1200. I've been doing my research on box-building the last couple weeks so I think I'm ready to try my first one. I been trying to learn how to use Torres and after about an hour of playing with numbers tonite I came up with a box. Sundown specs suggest 2-2.5cubes for two E10s so I designed a box that is 2.89cubes gross volume and 2.48 cubes net volume and tuned to 33hz. Anyone with experience using the E woofer got any suggestions as to whether this box would be good for the amount of power or does it need to be bigger. Quote Link to comment Share on other sites More sharing options...
TS2GFrank Posted February 28, 2014 Author Report Share Posted February 28, 2014 Also Torres says that my port area is 21inches if that helps..... Quote Link to comment Share on other sites More sharing options...
Reed Farrar Posted February 28, 2014 Report Share Posted February 28, 2014 I took a single e10 design and made a dual box for my old setup and it was a good sounding box. I figure your already set on building one or i would try to sell it but if you want that design i could prob find it somewhere Quote Link to comment Share on other sites More sharing options...
TS2GFrank Posted February 28, 2014 Author Report Share Posted February 28, 2014 Sure, that would be helpful. Thanks Quote Link to comment Share on other sites More sharing options...
Reed Farrar Posted March 1, 2014 Report Share Posted March 1, 2014 Enclosure Specifications:Fb = 34.5 HzVb = 1.1 ft^3External Height = 13 inExternal Width = 21.5 inExternal Depth = 13 inPort Width = 1 3/8 inCut Sheet List:* All Dimensions in Inches.* Wood Thickness is 3/4 for all Parts.External Enclosure Parts:Front = 19 3/8 x 11 1/2Back = 21 1/2 x 11 1/2Left & Right Sides:Side 1 = 11 1/2 x 11 1/2Side 2 = 12 1/4 x 11 1/2Top & Bottom = 21 1/2 x 13L Port Internal Assembly Parts:Front to Back = 10 1/8 x 11 1/2Extension = 15 1/2 x 11 1/2Assembly guide (generic dimensions): Quote Link to comment Share on other sites More sharing options...
Reed Farrar Posted March 1, 2014 Report Share Posted March 1, 2014 I just combined this design into one single box with the ports facing out the sides and i changed the sub cutout to the side so they can face the front. i thought it might change the sound since the subs are mounted on the side but this box sounds great with any kind of music. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.