Need help on Box Design 2 - 12" Massive Hippos

[jarredondo1999]

My dimensions are as follows and the box will be like a wedge box. Height 22 Width 44 Top Depth 6.5 Bottom Depth 14. These two 12's will be pushed by a RF T1500. The truck is a 2004 Dodge Truck, single cab. This is what i came up with on Torres but not sure if it's correct. Joe X helped me with something similiar before.

Thanks,

[Joe X]

That's going to be low port area, and you should also be careful with the mounting depth of the subs not hitting the back wall of the box.

[jarredondo1999]

That's going to be low port area, and you should also be careful with the mounting depth of the subs not hitting the back wall of the box.

Okay, I am looking at the manual I need to shoot for 43.75 port area. The mounting depth is 7.59 so I should be good on that. Thanks for your help, your a good dude.