TuanTrang Posted June 14, 2014 Report Share Posted June 14, 2014 Well Hey Guys, (Sorry if i posted in the wrong area) But this is what i just upgrade and currently owned. SSL F2600D Amp 2 Mtx Audio Thunder 4500 (225 Rms Each, Dual Coil, 4ohm) I want to setup the loudest bass as possible with that setup, One of my friend told me to get 4 ohm each of the sub and wire it to 1ohm amp. My amp is Mono Class D(1 ohm) This is what the previous owner setup when i bought it. http://s926.photobucket.com/user/xtremerps/media/oldsetup.png.html So i do this new setup instead. Please tell me if im wrong. http://s926.photobucket.com/user/xtremerps/media/newsetup.png.html Link to comment Share on other sites More sharing options...
Krakin Posted June 14, 2014 Report Share Posted June 14, 2014 With two dual voice coil speakers you will want 4-ohm coils and you can parallel them down to 1-ohm. Krakin's Home Dipole Project http://www.stevemeadedesigns.com/board/topic/186153-krakins-dipole-project-new-reciever-in-rockford-science/#entry2772370 Krakin, are you some sort of mad scientist? I would have replied earlier, but I was measuring the output of my amp with a yardstick . . . What you hear is not the air pressure variation in itself but what has drawn your attention in the two streams of superimposed air pressure variations at your eardrums An acoustic event has dimensions of Time, Tone, Loudness and Space Everyone learns to render the 3-dimensional localization of sound based on the individual shape of their ears, thus no formula can achieve a definite effect for every listener. Link to comment Share on other sites More sharing options...
truthsayer Posted June 14, 2014 Report Share Posted June 14, 2014 Follow the diagram Krakin posted. The diagrams you showed, appear to only have 1 coil on each sub seeing power. truthsayer Link to comment Share on other sites More sharing options...
TuanTrang Posted June 14, 2014 Author Report Share Posted June 14, 2014 Thanks Krakin, Let me work on it in a minute, Texas weather freaken humid and hot lol. But let me ask a noob question, With 225 RMS Each with a total of 450 RMS, With a 1ohm setup, How loud can it be compare to 2ohm or above? Link to comment Share on other sites More sharing options...
Krakin Posted June 14, 2014 Report Share Posted June 14, 2014 3 dB = 2 times the power of the original measurement. 3 dB increase is BARELY noticeable if at all. 10 dB increase is perceived as doubling the volume to the human ear. The rest depends on acoustics and where you place the speaker in the car. Krakin's Home Dipole Project http://www.stevemeadedesigns.com/board/topic/186153-krakins-dipole-project-new-reciever-in-rockford-science/#entry2772370 Krakin, are you some sort of mad scientist? I would have replied earlier, but I was measuring the output of my amp with a yardstick . . . What you hear is not the air pressure variation in itself but what has drawn your attention in the two streams of superimposed air pressure variations at your eardrums An acoustic event has dimensions of Time, Tone, Loudness and Space Everyone learns to render the 3-dimensional localization of sound based on the individual shape of their ears, thus no formula can achieve a definite effect for every listener. Link to comment Share on other sites More sharing options...
TuanTrang Posted June 14, 2014 Author Report Share Posted June 14, 2014 2 sub facing rear, 4 gauge amp kit from belva. 2600 watt rsm if using 1 ohm load, which what im seting up right now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.