B2 Hertz Posted August 13, 2014 Report Posted August 13, 2014 I just bought 2 pairs of sq super tweeters and on the positive terminal it has a bass blocker on it, I plan on running active so I was wondering if I could just desolder it or snip it off the terminal? If not how would I go about connecting my speaker wire to the bass blocker.
truthsayer Posted August 13, 2014 Report Posted August 13, 2014 I would not remove it. As far as the wiring, not sure where the confusion is. Just wire it like you normally would. If you need to solder the pos connection, then do it. truthsayer
tacomaguy1 Posted August 13, 2014 Report Posted August 13, 2014 I removed mine Active your controlling the crossover points seperately so no need Team Flex Issues
B2 Hertz Posted August 13, 2014 Author Report Posted August 13, 2014 So just use like a butt connector? I figured that would break the wire coming from the bass blocker since it's solid.
Popwarhomie Posted August 13, 2014 Report Posted August 13, 2014 Desolder it if running fully active. 2010 Focus coupe- 8 12" wall. 157.5@46hz 2016 Focus ST - SQ build.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.