rockFord_Expedition Posted February 28, 2015 Report Share Posted February 28, 2015 What size dies are y'all using for shca 1/0? I used the 70, but I don't really like the fins that it makes on the lug, would the 95 be too large?I explained how to get rid of the fins.You use 2 different size dies, and rotate the lug and do it about 4 times with each die. Crimp the entire length of the lug that hold wire, so you have to crimp it twice with each die anyways, and when you rotate it to get rid of the fins thats another 2 crimps with each. So which two dies do you use? Honestly I haven't crimped any 1/0, only the 2/0 from SHCA and even at that i dont recall. I just grab a set and test fit them around the lug before I do the crimp. I make sure it's going to get a decent squeeze but not too drastic each time. Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.