shadowcaster Posted March 20, 2015 Report Posted March 20, 2015 so heres what im thinking if anyone can chime in and let me know if anything looks off thanks guys 17.5x35x23 is about max 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class
Joe X Posted March 21, 2015 Report Posted March 21, 2015 A double layer baffle would be nice. You should build a cardboard test box if building outside, the box may not fit in it's way in.
shadowcaster Posted March 21, 2015 Author Report Posted March 21, 2015 thanks joe,i know the box needs to be built in the trunk from the last 15 i had in there and the box was a tad smaller on the E series 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class
shadowcaster Posted March 21, 2015 Author Report Posted March 21, 2015 added the 2nd baffle and changed the size a bit to keep the 4.25cuFt 2000 blazer LS 240 mechman 2 b2 HN v3 15s crescendo bc5500 @.5 1/0 ebflex ofc d680/g31 kenwood deck mb quart components crescendo pwx 8s lots more to come blazer build http://www.stevemeadedesigns.com/board/topic/204432-shadowcasters-2k-blazer/ 142.8db MECA 2016 PA state champ mod 1 class
Recommended Posts
Archived
This topic is now archived and is closed to further replies.