wL<3bass Posted April 9, 2008 Report Posted April 9, 2008 I use heavy duty cutters and a utility knife and for stuff to big for the heavy duty cutters (1/0 locomotive power wire) I get my dad's grinder with a cutting disc on it. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
caddylac Posted April 9, 2008 Author Report Posted April 9, 2008 (edited) damn lol. i dont think ill be gettin that serouis. Edited April 9, 2008 by caddylac Quote
caddylac Posted April 9, 2008 Author Report Posted April 9, 2008 i have a simaler tool to this, form when i was installin air bags on another car. its the bomb at cuttin 0 awg. http://www.sears.com/shc/s/p_10153_12605_0...rd=pipe+cutters Quote
Aaron813 Posted April 9, 2008 Report Posted April 9, 2008 I have a pair of those for cutting cpvc pipe they wont do anything for wire Quote
caddylac Posted April 9, 2008 Author Report Posted April 9, 2008 man i dont know, the pair i got look real close to those in the pic. i used them on airline and 0awg and 4awg and has worked great every time, nice and smooth effortless cutts. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.