whack0922 Posted May 12, 2015 Report Posted May 12, 2015 Quick question. If i were to amp my door speakers, would i have to connect the wire harness coming from the radio itself or just use the RCA cables?
Bob Tzimenatos Posted May 12, 2015 Report Posted May 12, 2015 You have to run a signal to the amp, then speaker wires to each speaker. Assuming you have an aftermarket head unit? Use RCA's fort he signal to the amp.
n8ball2013 Posted May 12, 2015 Report Posted May 12, 2015 Amp question amp forum not a coincidence THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
firebirdude Posted May 12, 2015 Report Posted May 12, 2015 RCA cables from head unit to amplifier. Then speaker wire out from the amplifier runs to each speaker. How you cover that last part is up to you. If you want to run new speaker wire into each door, that'll work. If you want to run all the amp outputs back up to the head unit and connect them to the factory speaker wires, that'll work (provided you don't have a factory amp). If you want to run the amp outputs to the kick panels and tag each factory speaker wire there, that'll work.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.