slapaddict209 Posted August 10, 2015 Report Share Posted August 10, 2015 I'm currently trying to buy a new amp to match my Zapco dc650.6 I'm going to run 2 dd 2515 d4s and wanted some input wich would be louder 1 dc1100.1 on both subs wired to 1 ohm suposaly they can handle the load or 2 dc500.1 one on each sub wired @ 2 ohm what they are ratted at I can also get a better deal on the 2 dc500.1 anybody thanks Link to comment Share on other sites More sharing options...
ZAPCO209 Posted August 10, 2015 Report Share Posted August 10, 2015 I would not run that 1100.1 below 2ohms, all the zapco I've ever had did not do well below recommend impedance. THE DRIVING FORCE Link to comment Share on other sites More sharing options...
Wehan Posted August 10, 2015 Report Share Posted August 10, 2015 No vs threads and no "what is louder" threads. Link to comment Share on other sites More sharing options...
slapaddict209 Posted August 10, 2015 Author Report Share Posted August 10, 2015 I don't think it's a versus thread due to it's the same brand and series the 1100 wins for power obviously but I wanted to no more if anybody has had any experience with these dc series amps there rated at 2 ohm but I've done a lot of reserch and Zapco themselves say that it can handle 1 ohm due to the low z setting and the Intelligent Rail Voltage Control feature i mean I'm not trying spend a lot of money on some amps to blow them out I just want to know some hands on opinions Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.