77-AUDIO Posted April 14, 2008 Report Share Posted April 14, 2008 I am installing an alarm in a 1965 Mustang and can't find the starter interupt. Please help Quote PPI dbl dinDC Level 31.77cubes net tuned to 33htz.DC audio 2.0kCT Pro Audio 8" in front, 6.5 in rear Link to comment Share on other sites More sharing options...
ISO Posted April 14, 2008 Report Share Posted April 14, 2008 What do you mean you can't find the starter interrupt. You don't find it you have to make it useing a relay. Quote Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character. Link to comment Share on other sites More sharing options...
ISO Posted April 14, 2008 Report Share Posted April 14, 2008 Oh, do you have a manual transmission if so I'm staying out of this one. Quote Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character. Link to comment Share on other sites More sharing options...
ISO Posted April 14, 2008 Report Share Posted April 14, 2008 http://www.the12volt.com/relays/page2.asp some starter interrupt circuits Quote Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character. Link to comment Share on other sites More sharing options...
77-AUDIO Posted April 14, 2008 Author Report Share Posted April 14, 2008 http://www.the12volt.com/relays/page2.aspsome starter interrupt circuits sorry I posted it wrong. I cant find the wire to cut that goes from the ignition to the start solenoid. So when the alarm is going off the car will not start. this car will not have the autostart option Quote PPI dbl dinDC Level 31.77cubes net tuned to 33htz.DC audio 2.0kCT Pro Audio 8" in front, 6.5 in rear Link to comment Share on other sites More sharing options...
jmsonoma03 Posted April 26, 2008 Report Share Posted April 26, 2008 use a dmm or test light wire will only show 12v while cranking good luck hope you are flexible getting wires under that dash is a bish Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.