bbeljefe Posted September 28, 2015 Report Share Posted September 28, 2015 So I've been wondering if the SK125.4 would handle a 1Ω load for a while now and I also wanted to know just what they can do, as I'm running them in the Evil Goat. Well, we finally got the chance to hook one up to the AMM-1 and frankly, I'm happy with the results.Here are the tests. Both were done on my sound board which consists only of a couple of 75AH wet cells with a 25 amp power supply behind them.Test box is a t-line for two 8s with a pair of D2 IX 8s. If you haven't seen these little beasts, check them out. They're hands down the best performing budget 8 I've ever handled and we've sold a lot of them with very few problems.Oh and, when we've had a problem, as always, the guys at Skar take very good care of us. So here goes, first is the 2Ω test with one channel driven: Second is the 1Ω test. Two channels driven in bridged mode.... Facebook: facebook.com/audioanarchyllc Instagram: audioanarchyllc Youtube: youtube.com/bbeljefe Link to comment Share on other sites More sharing options...
greezychef Posted October 8, 2015 Report Share Posted October 8, 2015 good to see the mad anarchist hard at it. this would be the perfect amp for my set up if i decide to add 2 more DD vo-8's to my doors. right now my little 60.4 is pushing the hell out of just 2 of them. Link to comment Share on other sites More sharing options...
Recommended Posts