vike4511 Posted November 24, 2015 Report Posted November 24, 2015 Currently have a singer 350 amp alternator and was wondering if 2 kinetik HC2000 would be enough for a AQ3500 and mids amp. Should be about 450 amps of draw at full tilt. Will I see too much drop and should I try to budget for an extra battery ( don't have the funds for a third right now).
hdorre Posted November 24, 2015 Report Posted November 24, 2015 When i ran 4k, I had only a 230A alt and 150aH of reserve. I held high 13s revved and 12.9-13.1 at idle. I have voltage vids somewhere, if you even care. I was wired to 1 ohm though. On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread
tboorn Posted November 24, 2015 Report Posted November 24, 2015 you should be more than ok. although once you start clipping the amperage draw jumps up quite a bit, so try and keep it clean Fidelity Built to Last Team Sound Asleep 24Runner Build Log: http://www.stevemeadedesigns.com/board/topic/196657-24runner-sleeper-system-lots-of-fi-neo-dd-focal-new-video-w-juicebox-lithium/ 2 x 12" Fi BTL N2 / 2 x 12" Fi BTL N3 2 DD M3b Maxwell 2.7V 3000F Supercapacitors Pioneer DEH-80prs Focal P165 V30 components Rockford Fosgate T-400.4
Recommended Posts
Archived
This topic is now archived and is closed to further replies.