alaskanzx5 Posted December 29, 2015 Report Share Posted December 29, 2015 Found out that some how the 3 wires that connect to the adjustment knob (potentiometer) broke off at the knob. Just need a pic of the wires connected to the knob so I can re solder the connections and get it working. Wire colors on mine are black white and red. Pics today if possible would be great thanks. If no one has them it's not to big of a deal. Mike singer is willing to send me pics of it but it will be a few days. Just going one of you would be willing to help me out. Thanks in advance. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
alaskanzx5 Posted December 30, 2015 Author Report Share Posted December 30, 2015 No longer needed, after hours of searching and searching I got it. Alt is working and I have complete adjustment of it. Car however has a smaller light weight pulley on it from the previous owner (crankshaft pulley). Doesn't allow the alt to spin fast enough at an idle to tureen on. Replacing it with a stock pulley instead. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.